[duxuser] SV: Versapoind duo with duxbury
- From: "Rune Gjesdahl" <rune@xxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Tue, 5 Aug 2003 10:55:34 +0200
Hi
It's easy to check the paper out sensor. Just enter the menu and turn it off
(OF, 0.1E,12.0E,1.1E). Just be sure there are paper in the embosser at all
time. If it run correctly after the sensor is switch off, you will have to
adjust or replace the sensor. OF, 0.1E,12.1E,1.1E turn it on again. This is
if menu 1 is active.
Rune
Other related posts:
- » [duxuser] SV: Versapoind duo with duxbury