[duxuser] Re: a page number question
- From: "George Bell" <george@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 31 Jan 2011 11:48:55 -0000
Sorry, Steve. I tend to forget my left from my right at midnight
(Smile)
And sorry, Sonya, I did actually mean move it right.
George.
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Dresser
Sent: 31 January 2011 03:10
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: a page number question
George,
Moving the paper to the left will push the numbers closer to the right
edge.
Steve
----- Original Message -----
From: George Bell <mailto:george@xxxxxxxxxxxxxxxxxxx>
To: duxuser@xxxxxxxxxxxxx
Sent: Sunday, January 30, 2011 14:00
Subject: [duxuser] Re: a page number question
Hi Sonya,
If you have the space on the left, the easiest way might
simply be to loosen the tractor feeds, and move the paper a fraction
left.
If you do not have the luxury of doing this, then assuming
your left margin is set to zero, the only solution is to reduce the
characters per line by one or more characters.
George.
________________________________
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Sonya Ergle
Sent: 30 January 2011 00:17
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] a page number question
I recently changed to narrow width paper in my embosser. The
page number still shows up on the top right of the page like it
should. I've noticed now that the page number is on the edge of the
paper. Is there a way I can move the page number over just a little
bit to the left? I'm using Duxbury 10.6. Thanks in advance for any
help.
Other related posts:
