[duxuser] Re: embosser error question
- From: George Bell <george@xxxxxxxxxxxxxxxxxxx>
- To: "duxuser@xxxxxxxxxxxxx" <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 26 Mar 2015 14:01:43 +0000
This usually indicates that your embosser is not set up correctly in DBT.
If it is connected USB, first ensure that the embosser appears in your system's
list of Devices and Printers.
Now run DBT and from the Global Menu, select "Embosser Setup".
If you have already added an embosser from within DBT, ensure that it is
highlighted in the Brailler Device: list and select "Modify Embosser".
On the dialog which comes up, there is a section called "Output Options" under
which are three radio buttons. Ensure that the "Send to Printer" radio button
is checked, and from the list of your systems printers to the right of the
button, select your embosser.
Click OK twice to return to DBT.
I strongly suggest you start a new document with just a line or so, translate
and emboss to test that things are working.
George
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Heberger Lisa E
Sent: 26 March 2015 12:55
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: embosser error question
I tried that. Any other ideas?
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Arletta Shenfeld
Sent: Thursday, March 26, 2015 8:29 AM
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] Re: embosser error question
I've gotten similar messages when doing a big job recently. I just closed the
file, reopened it, turned the embosser off and then on again, and tried again.
*************************************
Arletta J. Shenfeld
Executive Assistant
Pennsylvania Association for the Blind
555 Gettysburg Pike, Suite A 300
Mechanicsburg, PA 17055-5206
717-766-2020 ext. 100
www.pablind.org<http://www.pablind.org/>
Visit us on
Facebook<https://www.facebook.com/pages/Pennsylvania-Association-for-the-Blind/272275750320>
Support PAB with your purchases at Amazon
Smile<https://smile.amazon.com/ch/23-1396837>
From: duxuser-bounce@xxxxxxxxxxxxx<mailto:duxuser-bounce@xxxxxxxxxxxxx>
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Heberger Lisa E
Sent: Thursday, March 26, 2015 8:22 AM
To: duxuser@xxxxxxxxxxxxx<mailto:duxuser@xxxxxxxxxxxxx>
Subject: [duxuser] embosser error question
Good morning,
I was wondering if anyone else has encountered the error below? If so do you
have any suggestion on how to handle this?
Thanks in advance.
Lisa
The error reads as follows:
Embossing Failed due to an error at line 1262 of file dxemb_job.c: The system
cannot find the file specified.
Other related posts:
