[duxuser] Re: problems using DBT 10.5 with Jaws 6 and speech
- From: Dave Durber <dadurber@xxxxxxxxxxxxx>
- To: duxuser@xxxxxxxxxxxxx
- Date: Wed, 17 Aug 2005 21:50:22 -0400
In actual fact, Freedom Scientific's Tech Support Team suggests
setting the number of pixels per space to 99.
Sincerely:
Dave Durber
On Tue, 16 Aug 2005 17:52:15 -0500, you wrote:
>John, in addition to what Caroline said, I have an idea that will
fix the tabs problem mentioned in the last point. While she's in DBT,
have your friend go into the Jaws configuration manager, advanced
settings, and change the number of pixels per tab from 8 to 80. This
should eliminate the display gaps she's having trouble with.
>
> ----- Original Message -----
> From: Caroline Congdon
> To: duxuser@xxxxxxxxxxxxx
> Sent: Monday, August 15, 2005 8:32 PM
> Subject: [duxuser] Re: problems using DBT 10.5 with Jaws 6 and speech
>
>
> Hi. The scripts for DBT are set to install in version 5 of JFW. Do this.
>
> Go to C:\Duxbury\jaws and copy the six files that appear in that folder to
> the clipboard. Now, navigate to the JAWS 6 settings\enu folder, (in Windows
> Xp c:\documents and settings\all users\application data\freedom
> scientific\jaws\6.X\settings\enu where X represents your JAWS version number,
> 0, 1, or 2), and paste the six files into this folder. Now, open DBT. If
> you get a message about getting a list of JAWS hotkeys you're done. If not,
> press insert-F2 and go down to script Manager. Open this up. Press
> Control-S which will recompile the scripts. Now, close configuration
> manager. The program should now read as it did before.
>
> Note: There may be easier ways to get to your JFW 6 folder, but I have given
> the long way here simply because I have no way of knowing what configuration
> is being used. Also, instead of the folder All Users, you can substitute the
> folder of the user, (for example on my machine I would use Owner), if you
> want to make these settings specific to one particular user. (Again, this is
> specifically for Windows XP.)
>
> Finally, if an older version of JAWS, such as 5.0 or 5.1 exists, you could
> skip the steps I've given above and simply go to the JAWS window, utilities,
> and choose the Merge Utility. Select the version of JFW that you want to
> merge with, (in this case 5.X), and let JFW update all your previous settings
> and scripts for you. Good luck, and hope this helps.
>
> Caroline
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
