#11019: Boot fail with SATA card and drive attached but not used by Haiku ----------------------------------+---------------------------- Reporter: jstressman | Owner: bonefish Type: bug | Status: assigned Priority: normal | Milestone: R1 Component: System/Boot Loader | Version: R1/Development Resolution: | Keywords: Blocked By: | Blocking: Has a Patch: 0 | Platform: All ----------------------------------+---------------------------- Comment (by jstressman): I purchased a null modem cable and built a test machine for Haiku that has both a serial out on the board, and PCI-e for the SATA card. I purchased an ATEN UC232A USB to PDA/Serial (DB9) Adapter and used that on this machine to receive the debugging output. After swapping the SATA card into that machine, I see the same almost instant reboot behavior with r46677 I'm attaching the output of the serial debugging both with a drive attached, and without. For the 2nd log without the drive attached, the crash at the end is unrelated and is documented in ticket #11040 -- Ticket URL: <https://dev.haiku-os.org/ticket/11019#comment:7> Haiku <https://dev.haiku-os.org> Haiku - the operating system.