#11019: Boot fail with SATA card and drive attached but not used by Haiku ----------------------------------+---------------------------- Reporter: jstressman | Owner: bonefish Type: bug | Status: assigned Priority: normal | Milestone: R1 Component: System/Boot Loader | Version: R1/Development Resolution: | Keywords: Blocked By: | Blocking: Has a Patch: 0 | Platform: All ----------------------------------+---------------------------- Comment (by jstressman): That was part of the problem I ran into on this. I don't have any serial output on this machine. If there were a way to output some debugging info to the screen that might help, as it reboots so quickly that I'm not sure how far it even gets into the boot process. It says "Loading system" in the upper left corner and reboots immediately, before you can get into the safe mode menu, or see anything else come up on screen. I'm definitely open to work with someone on getting it figured out. I could try to dig back and figure out where the shift/space for safe mode menu reboot came in, but I'm not sure we have official nightly revisions far back enough to find out. So I might potentially be doing a lot of custom builds. ;) I'm trying to put together a machine with both PCI-e and a serial port on it right now so that I can stick that SATA card in it and see if I can reproduce the problem. If so, then I can try running a null modem cable to another machine with a serial port I have to try collecting any potential debug info. I'll report back if/when I have any luck and we can potentially go from there. -- Ticket URL: <https://dev.haiku-os.org/ticket/11019#comment:6> Haiku <https://dev.haiku-os.org> Haiku - the operating system.