[ibis-macro] Re: BIRD-124: Dependency tables - question?
- From: "Walter Katz" <wkatz@xxxxxxxxxx>
- To: <kukal@xxxxxxxxxxx>, "'IBIS-ATM'" <ibis-macro@xxxxxxxxxxxxx>
- Date: Thu, 13 Jan 2011 10:02:13 -0500 (EST)
Kukai,
The impulse response of the channel must be determined before the AMI DLL
is called. The AMI file contains the switches that program the Tx or Rx
model. The value of these switches determine the analog model of the
driver that is required to determine the impulse response of the channel.
Walter
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Taranjit Kukal
Sent: Thursday, January 13, 2011 2:11 AM
To: IBIS-ATM
Subject: [ibis-macro] BIRD-124: Dependency tables - question?
Hi,
The dependency tables would be useful only if we want to keep same
AMI-code (dll) and just change the dependency outside of the code using
.ami file.
However, I do not see this as common use-model - I would assume that all
such dependency should be handled inside of c-code (Algorithmic...) and
that we should avoid overloading of .ami file such tables. AMI-code should
be able to handle such dependency by coding the right values for dependent
parameters based on Key parameters in ami file.
Please let me know if I am missing a use-case where this cannot be handled
inside the dll.
rgds
..kukal
Taranjit Kukal | Product Engineering Architect
P: 91 120 3984000 <http://www.cadence.com/> www.cadence.com
Other related posts:
