All,
Here are a few comments:
Page 2: Clarify in more detail the Requirements regarding "Init
Optimization":
Parameter: BCI_Training_Mode
Required: No, and illegal before AMI_Version 7.1
Page 3: Replace this Table and Use V7.0 Table 33 format for Table YYI and
insert the BCI_Training Mode requirement a No/Yes note 5):
Replace:
Table YY1 - General Rules and Allowable Usage for BCI Reserved Parameters
Reserved Parameter
General Rules
Allowable Usage
Required
Default
Info
In
Out
Dep1
InOut
BCI_Message_Interval_UI
No, Yes if BCI_Protocol is present
--
X
BCI_ID
No, Yes if BCI_Protocol is present
--
X
BCI_Protocol
No, Yes to support BCI protocol
--
X
BCI_State
No, Yes if BCI_Protocol is present
--
X
BCI_Training_UI
No, Yes if BCI_Protocol is present
--
X
BCI_Training_Mode
No, Yes if BCI_Protocol support "Init" Optimization
X
Use this V7.0 Table 33 Format:
Table 33 - General Rules and Allowable Usage for BCI Reserved Parameters
Reserved Parameter
General Rules
Allowable Usage
Required
Default2,4
Info
In
Out
Dep1
InOut
BCI_Message_Interval_UI
Yes3
--
X
BCI_ID
Yes3
--
X
BCI_Protocol
No
Undefined
X
BCI_State
Yes3
--
X
BCI_Training_UI
Yes3
--
X
Notes:
1) Illegal for AMI_Version 6.0 and earlier
2) "Default" in this context means "behavior if Reserved Parameter is
absent"
3) Required if BCI_Protocol is present
4) "--" means that an entry must be provided if the parameter is
present; no default is assumed or permitted
Add BIRD201.1 note to BACKGROUND INFORMATION/HISTORY
Regarding
New DLL Function Signatures Link training Communications in Statistical Flow
Statistical Training/Analysis Flow for
Channels with No Repeater
Statistical Training/Analysis Flow for
Channels with Repeaters
Editorial: Should these sections/subsections? be inserted as a renumbered
Section 13.9.3 and subsections under it?
Section 10.9.3 moves to Section 10.9.4
DLL should be EXECUTABLE MODEL?
Bob
--
Bob Ross
Teraspeed Labs
www.teraspeedlabs.com <http://www.teraspeedlabs.com/>
bob@xxxxxxxxxxxxxxxxx
Direct: 503-246-8048
Office: 971-279-5325