Hi Mike,
I have two questions regarding sentence "which is to be added to the behavior
implemented by the EDA tool by modifying the signal at the receiver" in the
Tx_Rj_LF definition.
1. By "signal at the receiver" do you mean the input signal or the output
signal of the DLL?
2. If there are two transmitters in the channel, one has Tx_Rj_LF and the
other doesn't, how shall the signal of the receiver be modified?
Thanks,
Fangyi
From: ibis-macro-bounce@xxxxxxxxxxxxx <ibis-macro-bounce@xxxxxxxxxxxxx> On
Behalf Of Mirmak, Michael
Sent: Thursday, July 18, 2019 4:33 PM
To: IBIS-ATM (ibis-macro@xxxxxxxxxxxxx) <ibis-macro@xxxxxxxxxxxxx>
Subject: [ibis-macro] Draft BIRD for separating high- and low-frequency Tx Rj
parameters
[EXTERNAL]
Please find enclosed a draft BIRD adding parameters to separate Tx Rj into
high- and low-frequency components. The simple approach here is based on the
conversation held in ATM some months back.
Comments are welcome; I may not be available for the next ATM meeting but
should be able to introduce it at the following meeting.
Thanks!
* MM
