I added Section 2 to the BIRD Walter emailed me and the document has been posted on the IBIS-ATM web site. I made one additional change to the Word document: I changed the language to English from French so that the spell checker would not mark everything red... Thanks, Arpad ================================================== ________________________________ From: ibis-macro-bounce@xxxxxxxxxxxxx [mailto:ibis-macro-bounce@xxxxxxxxxxxxx] On Behalf Of Walter Katz Sent: Wednesday, February 10, 2010 4:10 AM To: IBIS-ATM Subject: [ibis-macro] I added the following to the BIRD which should clear up confusion on Allowed Value Methods All, I added the following to the AMI BIRD I sent to Arpad: Each Usage In and InOut parameter has a single Value in the data passed to the DLL using Parameters_In. An Allowed-Value is the method that the EDA tool can determine if it has one or more than one allowed value for each parameter. If there is more than one allowed value, the EDA tool can choose the value of this parameter automatically from the Allowed Values List, or it can have the user select a value from the Allowed Values List. The EDA tool would generate an Allowed Values List of in accordance with the details for that Allowed Value Method. Similarly, the EDA tool can determine the Allowed Value List for each Usage Info parameter. If there are more than one value in the Allowed Value List the EDA tool can select that value automatically from the Allowed Values List, or it can have the user select a value from the Allowed Values List. Usage Out parameters need no Value at all. I think it should be optional to supply an Allowed Value for Usage Out parameters, since the EDA tool has know way of knowing what the DLL will return. Walter Walter Katz 303.449-2308 Mobile 720.333-1107 wkatz@xxxxxxxxxx www.sisoft.com