[ibis-macro] Re: IBIS-ATM teleconference - Agenda for January 10, 2017

  • From: "Bob Miller" <dmarc-noreply@xxxxxxxxxxxxx> (Redacted sender "bob.miller" for DMARC)
  • To: "Muranyi, Arpad" <Arpad_Muranyi@xxxxxxxxxx>
  • Date: Tue, 10 Jan 2017 11:51:08 -0700

Hi all -

Attached is a draft revision of BIRD147.4 (tentatively updated to 147.5) to
address issues brought up just prior to the vote in the last IBIS Open
Forum:

Executive summary:

BIRD147.5 changes BCI_GetWave_Block_UI to BCI_Message_Interval_UI and the
Type of both it and BCI_Training_UI from UI to Integer. It softens the
linkage between it and the EDA-determined AMI_GetWave  block_size while
retaining the intended primary purpose of providing a mechanism for the
model to inform the EDA tool of the optimal messaging interval to allow the
EDA tool to in turn manage the AMI_GetWave block_size to optimize the
required adaptation time.


Regards,


Bob

On Tue, Jan 10, 2017 at 9:25 AM, Muranyi, Arpad <Arpad_Muranyi@xxxxxxxxxx>
wrote:

Time:  Tuesday, January 10, 2017 at Noon US Pacific Time
=====

WebEx:
======
https://sisoft.webex.com/sisoft/j.php?MTID=m1775c35b7d9a55735fbb2c6787622
2ba

Meeting Number: 735 161 627
Meeting Password: IBIS


Audio:
======

Voice dial-in:    (800) 637-5822
International: +1 (647) 723-3937 <--- (For Canada)
                      0114501530 <--- (For Sweden)
                      0201400572 <--- (For Sweden Toll Free)
                    069509594672 <--- (For Germany)
                     08001014542 <--- (For Germany Toll free)
Access Code:            685-0440

Mentor Global Crossing Teleconference commands for audio:
http://www.globalcrossing.com/customer/collaboration/cust_
ready_access_tips.aspx
---------------------------------------------------------------------
---------------------------------------------------------------------

Agenda
======

1)  Opens
2)  Roll call
3)  Review of ARs:

Walter:  email his example and BIRD 158.4 to the ATM list
Mike L:  update the "IBIS 6.2 BIRD Candidates" to rev 7 and send it to the
ATM list

Any other AR-s?

4)  Call for any IBIS related patent disclosures
5)  Approval of minutes


6)  BIRD147.4
   - discussion


7) Review BIRD187.1                                             (All)
   - discussion


8) BIRD158 (AMI Touchstone file (R) Analog Buffer Models)
   - discussion


9)  New BIRDs from Editorial Task Group?                  (Bob/Radek)
    a. Specify buffer reference terminals for pins ([Pin Reference])
    b. Simulation (aka DIA) vs. DUT (depends on #a)
    c. C_comp and package reference in simulation clarifications
      (depends on #a)
    d. Make changes to the [Receiver Threshold], once a. and b. are
resolved


10) New Redriver flow BIRD                           (Walter, Fangyi)
    - discussion


11) Buffer impedance / C_comp improvements                    (Randy)
    - discussion


Tabled topics:
==============

12) How to handle missing min/max data?                       (Arpad)
    - what should be the governing rule for synchronizing
      typ/min/max data?



Pending BIRDs, expected to be rejected:
=======================================

125.1  Make IBIS-ISS Available for IBIS Package Modeling
128.2  Allow AMI_parameters_out to pass AMI_parameters_in data on calls to
AMI_GetWave
145.3  Cascading IBIS I/O buffers with [External Circuit]s using the
[Model Call] keyword
163    Instantiating and Connecting [External Circuit] Package Models with
[Circuit Call]
164    Allowing Package Models to be defined in [External Circuit]


Pending BIRDs, expected to be accepted (currently in discussion):
=================================================================

147.4  Back-channel support
181.1  I/V Table Clarifications
184.2  Model_name and Signal_name Restriction for POWER and GND Pins
185.2  Section 3 Reserved Word Guideline Update
186    File Naming Rules

TBD    New interconnect BIRD
TBD    C_comp modeling with IBIS-ISS


Pending BIRDs awaiting discussion:
==================================

158.3  AMI Touchstone file (R) Analog Buffer Models
161.1  Supporting Incomplete and Buffer-only [Component] Descriptions
165    Parameter Passing Improvements for [External Circuit]s
166    Resolving problems with Redriver Init Flow


Thanks,

Arpad
=====================================================================
---------------------------------------------------------------------
IBIS Macro website  :  http://ibis.org/macromodel_wip/
IBIS Macro reflector:  //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
  To: ibis-macro-request@xxxxxxxxxxxxx
  Subject: unsubscribe


Attachment: bird147.5_draft1.docx
Description: application/vnd.openxmlformats-officedocument.wordprocessingml.document

Other related posts: