Time: Tuesday, July 28, 2020 at Noon US Pacific Time
=====
JOIN WEBEX MEETING
https://sae.webex.com/sae/j.php?MTID=m994fc2205b90d55ccf43786cf4dd6d1a
Meeting number: 628 115 697
Meeting password: Tuesday2020
JOIN FROM A VIDEO CONFERENCING SYSTEM OR APPLICATION
Dial sip:628115697@xxxxxxxxxxxxx
You can also dial 173.243.2.68 and enter your meeting number.
JOIN BY PHONE
1-866-469-3239 Call-in toll-free number (US/Canada)
Tap here to call (mobile phones only, hosts not supported):
tel:1-866-469-3239,,*01*628115697%23%23*01*
1-650-429-3300 Call-in toll number (US/Canada)
Tap here to call (mobile phones only, hosts not supported):
tel:%2B1-650-429-3300,,*01*628115697%23%23*01*
Access code: 628 115 697
Global call-in numbers:
https://sae.webex.com/sae/globalcallin.php?MTID=m54d047ecee7bf4b971dd745bcf8b0b81
Toll-free dialing restrictions:
https://www.webex.com/pdf/tollfree_restrictions.pdf
Add this meeting to your calendar (Cannot add from mobile devices):
https://sae.webex.com/sae/j.php?MTID=m085be40097e64d2951a0a3eca8679955
Unable to join the meeting? Contact support here:
https://sae.webex.com/sae/mc
---------------------------------------------------------------------
---------------------------------------------------------------------
Agenda
======
1) Opens
2) Roll call
3) Review of ARs:
Randy: Update the BIRD207 draft
- done
Any other AR-s?
4) Call for any IBIS related patent disclosures
5) Approval of minutes
6) BIRD207_draft1 (Randy)
New AMI Reserved Parameters Component_Name and Signal_Name
- questions/comments?
7) DDR5 DQ Write BCI protocol (Walter)
- introduction
8) Supporting PI modeling/simulation in IBIS (Zhiping)
- discussion?
9) BIRD181.2_draft2 (Bob)
- discussion on new draft
10) Motion to adjourn?
Topic bin list:
===============
- IBIS-ISS parser
- Parameter directionality summary (Mike M.)
- Removing the single-ended input threshold requirements for
differential buffers (Mike M.?)
- Removing the single-ended characterization load requirements for
differential buffers (Mike M.?)
- Fix all the referencing problems in the current specification
(after Randy's C_comp proposal and BIRD189 are done)
(BIRD181.1 Bob, Mike L.)
- Guidance for power-aware vs. AMI models - do we have rules for
how a power-aware (and therefore potentially non-LTI) buffer
analog data set should be used with IBIS-AMI algorithmic data?
(important topic - 2018 ASIA IBIS Summit presentations)
(the spec. may not need to be changed for this)
- Digital signing of DLL/SO files. Should it be mentioned in the
spec, or required?
Tabled ARs:
===========
Tabled topics:
==============
11) Jitter HF/LF components and Jitter Amplification (Mike M.)
- discussion
12) Other DDR5 related topics
- rise fall asymmetry
13) New BIRDs from Editorial Task Group? (Bob/Radek)
a) Specify buffer reference terminals for pins ([Pin Reference])
b) Simulation (aka DIA) vs. DUT (depends on #a)
c) C_comp and package reference in simulation clarifications
(depends on #a)
d) Make changes to the [Receiver Threshold], once a) and b) are
resolved
14) 166.4 Resolving problems with Redriver Init Flow (Walter)
15) BIRD190 (Ambrish)
16) Fangyi's Redriver flow BIRD draft (Fangyi)
- add equations
- consider rewriting the AMI "front end" in the spec (flows)
(when this proposal is added to the spec)
17) How to handle missing min/max data? (Arpad)
- what should be the governing rule for synchronizing
typ/min/max data?
Pending BIRDs awaiting discussion:
==================================
166.4 Resolving problems with Redriver Init Flow
190 Clarification for Redriver Flow
TBD New proposal for Redriver Flow (may replace BIRD166)
Thanks,
Arpad
=====================================================================
