[ibis-macro] Re: MinTypMax_BIRD draft
- From: "Walter Katz" <wkatz@xxxxxxxxxx>
- To: <Arpad_Muranyi@xxxxxxxxxx>, "IBIS-ATM" <ibis-macro@xxxxxxxxxxxxx>
- Date: Tue, 14 Sep 2010 10:40:37 -0400
Arpad,
Minor editorial change:
| Increment <typ> <min> <max> <delta>
|* where min <= typ <= max, min < max, and delta is always
positive.
|* After expansion, the expanded values of the parameter are
|* typ + N*delta where N is any positive or negative integer
|* value provided by the EDA tool during the expansion process
|* so that: min <= expanded values <= max
|* The EDA tool is expected to start the sweeps at typ, going
|* up closest to max, and then going down closest to min.
Walter Katz
303.449-2308
Mobile 303.883-2120
wkatz@xxxxxxxxxx
www.sisoft.com
-----Original Message-----
From: ibis-macro-bounce@xxxxxxxxxxxxx
[mailto:ibis-macro-bounce@xxxxxxxxxxxxx]On Behalf Of Muranyi, Arpad
Sent: Friday, September 10, 2010 4:15 PM
To: IBIS-ATM
Subject: [ibis-macro] MinTypMax_BIRD draft
Hello everyone,
As promised, here is a new BIRD draft to address the questions
raised by the parser developer regarding min/typ/max in the
AMI portions of the IBIS specification. This is row #15 in
the Task List spreadsheet:
http://www.vhdl.org/pub/ibis/macromodel_wip/archive/20100831/arpadmurany
i/IBISv5.0%20AMI%20specification%20BIRD%20task%20list/IBIS50AMI_TaskList
_2010_08_31.pdf
I hope to get feedback on this on or before the next ATM
teleconference so we can get this right.
Thanks,
Arpad
=================================================================
---------------------------------------------------------------------
IBIS Macro website : http://www.eda.org/pub/ibis/macromodel_wip/
IBIS Macro reflector: //www.freelists.org/list/ibis-macro
To unsubscribe send an email:
To: ibis-macro-request@xxxxxxxxxxxxx
Subject: unsubscribe
Other related posts:
