hold down the power button till it says power off instead of turning it off, press and hold the home button till it is quit. On Oct 19, 2013, at 6:12 PM, John Harden <jharden01@xxxxxxxxxx> wrote: This field test is quite interesting. Sitting here at my desk I get -63. I cannot seem to make it stick no matter how long I hold down the power button. Did I do some thing wrong? John Harden Quality Brailler Repair LLC For professional Perkins Braille Writer repair. 386-238-5871 jharden01@xxxxxxxxxx 145 N. Halifax Ave. #605 Daytona Beach, FL 32118 On Oct 19, 2013, at 8:39 AM, David Hilbert Poehlman <poehlman1@xxxxxxxxxxx> wrote: > All, > > I found this to be useful so hope the author doesn't mind that I plant it > here. > > BTW, > Happy Catterday! > > ---begin quoted message:--- > Hi all! > Just wanted to throw in a quick tip for those of you who's not aware of this. > To check your networks signal in a more accurate way, to check if it's the > signal strenght that's bugging you, you can always use the iPhone Field Test. > Just open the phone app, then the keyboard and type in: > *3001#12345#* > and then hit call. You'll now bring up the iPhone Field Test screen, which > has a lot of information that I have yet to figure out. But the handy part, > is that the bars that shows the signal strength on the left side of the > status bar, has now changed to a number, with a minus sign in front of it. > This is a much more accurate number than the 5 bars can give you, and you can > also use it when calling your carrier to complain! > Here's how it works: > The lower the number, the better is your signal. You'll never get anything > lower than -40, and that's the theoretical signal you may get when standing > right beside a network base station. But considering that 5 bars is equal to > around -80, you can get much more information from this. > I think 2 bars is somewhere around -100, and above -100 you will find that > your voice begins dropping out and making wierd noises while on a phone call. > -110 is the place where the whole phone calls starts dropping out and you'll > have to constantly try to call your conversation partner back, even though > you'd probably not have any good luck doing that. > At around -120 - -130 the network announced will fall out, and "No service" > will appear in stead in the status bar. > That's it, a lot more accurate information to get from this hidden iPhone > feature than the common signal bars. > Oh, and a last tip: > If you want this to stick in your status bar, so that you can always switch > between signal strength in bars or this number, which I believe is given in > dBm's, you can do this: > While the Field test screen is open, hold down the Sleep/On/Off-button until > the slide to turn off appears. Then, don't slide to turn off the phone, but > hold the home-button down for a few seconds, to force quit the field test > app, and return to the home-screen again. > Now you can double-tap the area in the statusbar where the signal strength is > shown to switch between this dbm-number and the more common known bars. > > > > -- > Jonnie Appleseed > With His > Hands-On Technolog(eye)s > touching the internet > Reducing Technology's disabilities > One Byte At a time >