[mac4theblind] Re: iphone question

  • From: Scott Granados <scott@xxxxxxxxxxxxxxxx>
  • To: "mac4theblind@xxxxxxxxxxxxx" <mac4theblind@xxxxxxxxxxxxx>
  • Date: Sat, 1 Oct 2016 13:02:17 +0000

Ok, this is common but remember the meaning of bars in LTE is different than 
HSPA+ or Edge.  You need only 1 bar for connectivity with LTE.  What’s probably 
happening is your phone is selecting a higher frequency for more speed that has 
good enough coverage.  When you have data only and LTE disabled you use HSPA+ 
which in T-Mobile’s case uses a lower band possibly.  Also, when you enable 
Voice and Data you bring the 700 MHZ band in to play and with the new T-Mo 
carrier aggregation roll out you’re actually selecting multiple channels on 
multiple bands in parallel so let your phone do what it does and it should be 
just fine with all the features enabled.

I love the audio now especially with the lightning adapter on good headphones.  
It also gets a ton louder now which is good to have more power to drive my 
higher end cans.

Enjoy the 7, I think it’s a great upgrade and love mine.

On Oct 1, 2016, at 8:42 AM, Sandy Licht 
<slicht@xxxxxxxxxxxxx<mailto:slicht@xxxxxxxxxxxxx>> wrote:

Rebooting the iPhone seem to have helped a lot. When I enable data only, I get 
four bars of signal. However, when I enable both voice and data, I only get to. 
My carrier settings are up-to-date.

After rebooting I was able to enable the equalizer. I couldn't tell much 
difference, though. The clarity of the iPhone 7 Plus's speakers is amazing.

Sent from my iPhone

On Sep 30, 2016, at 9:43 PM, Scott Granados 
<scott@xxxxxxxxxxxxxxxx<mailto:scott@xxxxxxxxxxxxxxxx>> wrote:

Make sure the cell data is enabled and you enable both voice and data for 
T-Mobile.  THat’s my configuration and as a new phone it was flawless in the 
setup.  Also, carrier updates are very easy to install if there’s one 
available.  You should be running carrier 25.2 if you’re using the general 
release code or carrier 25.5.1 if you’re running 10.1 beta 1.


On Sep 30, 2016, at 3:05 PM, Sandy Licht 
<slicht@xxxxxxxxxxxxx<mailto:slicht@xxxxxxxxxxxxx>> wrote:

I ended up having to set up the phone as a new one. My carrier is T-Mobile. One 
of the issues I had was people were having difficulty understanding me. It 
sounded as if I were talking through a straw. When I called T-Mobile's 
tech-support, The problem was so bad the technician suggested I set up the 
iPhone7 Plus as a new phone, resetting everything in the process. This seem to 
have helped. If it had not, T-Mobile wanted to replace the phone. The problem 
is, iPhone 7's are on back order. I still can't enable LTE. I'm about to do a 
reboot to see if that helps. Strangely enough, when everyone was having 
problems after updating T-Mobile's carrier settings, I didn't have a problem at 
all, at least not with my iPhone 6s Plus.

Sent from my iPhone

On Sep 30, 2016, at 10:51 AM, Scott Granados 
<scott@xxxxxxxxxxxxxxxx<mailto:scott@xxxxxxxxxxxxxxxx>> wrote:

So restoring from a backup cross platform like that has never seemed like a 
good idea to me.  I always start my new iPhone each year with a fresh install 
and using the set up as new phone option rather then restoring from a backup.  
This way you don’t cary over problems from the previous release or have 
compatibility issues.

To enable LTE go to settings, cellular, insure that cellular data is selected 
as on then tap cellular options, under there you’ll see LTE which can be set 
to voice or data or both or off, set to both voice and data unlesss your 
carrier doesn’t support it or you have a compelling reason not to, and then 
select back to return to your main settings screen.  If you tell me which 
carrier you’re on I can tell you more about what to expect while on LTE.

Let me know if you need any other tips for things to set up or optimize there.  
And again I might consider setting up as a new device but that’s your call.

Good luck.



On Sep 30, 2016, at 11:33 AM, Sandy Licht 
<slicht@xxxxxxxxxxxxx<mailto:slicht@xxxxxxxxxxxxx>> wrote:

I also have an iPhone question. I am using an iPhone 7+, running the latest 
iOS. How do I turn on the equalizer in music settings? Whenever I press the 
toggle button, it keeps saying equalizer off. How do I enable LTE? Whenever I 
go into the phone settings and try to toggle the button, it says off.

Setting up this phone has been a wild ride! After setting it up using my latest 
back up and iTunes, my iPhone 7 Plus acted like a glorified paperweight! That 
was just the beginning of my woes!… But I won't go into the rest of it. At 
least the iPhone is cooperating now! My wish for all on this list who intend to 
get a new iPhone seven is: May the set up process be a lot more smooth than 
mine was! Have a great day!

Sent from my iPhone

On Sep 30, 2016, at 10:03 AM, Celeste Williams 
<celestejw@xxxxxxx<mailto:celestejw@xxxxxxx>> wrote:

Toward the bottom left of the screen, there should be a place where it says 
numbers. If you double tap that, then the numbers should come up.


Celeste and Saffie
have an awesome blessed day
Sent from my iPhone

On Sep 30, 2016, at 7:54 AM, skagithorselover 
<skagithorselover@xxxxxxxxx<mailto:skagithorselover@xxxxxxxxx>> wrote:

Am using an iphone 6. Tried to update to latest version, and I need to enter my 
pass code on the phone. However my iphone is only saying letters. How do I get 
it back to staying letterl and numbers with voiceover?
************


You are subscribed to the mac4theblind mailing list.


The url for this list, where one can unsubscribe or make any changes to their 
list subscription is:

//www.freelists.org/list/mac4theblind

The list archive is located at

//www.freelists.org/archive/mac4theblind/

All emails intended for the list owner can be sent to:

john@xxxxxxxxxxxxxxxxxx<mailto:john@xxxxxxxxxxxxxxxxxx>


************


You are subscribed to the mac4theblind mailing list.


 The url for this list, where one can unsubscribe or make any changes to their 
list subscription is:

//www.freelists.org/list/mac4theblind

The list archive is located at

//www.freelists.org/archive/mac4theblind/

 All emails intended for the list owner can be sent to:

john@xxxxxxxxxxxxxxxxxx<mailto:john@xxxxxxxxxxxxxxxxxx>


************


You are subscribed to the mac4theblind mailing list.


  The url for this list, where one can unsubscribe or make any changes to their 
list subscription is:

//www.freelists.org/list/mac4theblind

The list archive is located at

//www.freelists.org/archive/mac4theblind/

  All emails intended for the list owner can be sent to:

john@xxxxxxxxxxxxxxxxxx<mailto:john@xxxxxxxxxxxxxxxxxx>


(¹ªÞ²æìr¸›yÛh¶¦iÎ-…æåŠwfj)bž    
b²Ôázêå~Ší†+%ŠËp…êÞ¢wœj{§²æìr¸›zŠæjGšŸ'!jx²Ú-…è«–+-²æìr¸©¶*'ŠÈm¶Ÿÿà
­ç¥ŠËl¢¸?–+-þfœâØ^nX§u8^–+-j·!Š÷¢²ZjםjØm¶Ÿÿà­ç¥ŠËl¢¸?j·!Š÷¿™§8¶›–)Ýü    
ezf¢–ȧµéÝy×è®Ø^–+-£    Þ­Æ§mëžÛhŽˆg™§¢»ay¹b×(

************


You are subscribed to the mac4theblind mailing list.


    The url for this list, where one can unsubscribe or make any changes to 
their list subscription is:

//www.freelists.org/list/mac4theblind

The list archive is located at

//www.freelists.org/archive/mac4theblind/

    All emails intended for the list owner can be sent to:

john@xxxxxxxxxxxxxxxxxx<mailto:john@xxxxxxxxxxxxxxxxxx>


Other related posts: