[python] Re: Finnish Python 2
- From: Jukka Viirret <jviirret@xxxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Fri, 18 Nov 2005 13:16:27 +0200 (EET)
> it seems that Jukka has heated up his welding machine and
> is trying some minimalistic design:
>
> http://kotisivu.mtv3.fi/jviirret/python.htm
>
> See bottom of the page.
>
> Would like to know how it rides. The idea of making
> the seat an integral part of the frame is indeed fascinating.
Allright, first testride behind. Seat feels good, slipery and cold(test ride
temperature -5celsius). It,s made 0.75mm steel plate. Python is low
speeds(under 10km/h) stablier than old one. Bike has not yet brakes, so I dont
try over 20km/h speeds. I can make U-turn on 5-6m wide road at first try.
Technical data(now):
Steerin pivot angle: 56-59deg
Trail: -22-24cm
Seat height: 22cm
BB-height(at test ride): 40cm(adjustable)
picture: http://kotisivu.mtv3.fi/jviirret/python013.jpg
Jukka
...................................................................
Luukku Plus paketilla pääset eroon tila- ja turvallisuusongelmista.
Hanki Luukku Plus ja helpotat elämääsi. http://www.mtv3.fi/luukku
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
