Hi All, While riding my Python today I was thinking about steering dampers, while watching the front part I noticed sometimes I had to move very quick to correct a wobble. I guess as I get better I will have to move less. Imagine someone learning to ride an upright bike, moving the handlebars sometimes very quickly to try & keep balance, put a damper on it and they would not be able to ride, I'm quite sure the same can be said for the Python, for a beginner, without the ability to make quick movements they will not be able to balance. Regards, Carl On 03/11/2007, Stefan Bartels <sbartels@xxxxxxxx> wrote: > > Screen Door Damper: > Nice idea, but are these dampers designed for outdoor use with a lot of > dust, rain and oil? Are they designed for continuous, fast-changing loads? - > I don't think so. As the motorbike dampers are not much more expensive (at > least the cheap ones), they should be preferable... but that's just a guess. > Stefan > > 25hz schrieb: > > Why not use a damper from a screen door? They're made of Al with a steel > rod, some are very small, they're less than $20 and the lentgh is rather > immaterial, I think, when the damper can simply be run parallel to the frame > under the seat. The ones on my door operate the same way as a steering > damper. Open slowly and very little drag occurs, but try it fast, and they > slow things down. Plus, their dampening rate is adjustable. ? > > > Thanks for that, Kevin. > > They're certainly a lot cheaper than original spec ones, but quite long at > > 40cm. > > I've just found a smaller Cagiva Mito one on eBay for 20E. > > It'll go in the box with all the other possible parts until I get around > > to building the thing for real, not just in > > my head! > > All the best, > > Dan Chambers > Huntingdon, Cambridgeshire, UK > > Quoting Kevin Gibson <kevin@xxxxxxxxxxxxxxxx> <kevin@xxxxxxxxxxxxxxxx>: > > Hi everyone, I'm just at the dreaming - moving gently toward planning > stage, so have been watching the list with interest. > > There has been some discussion on steering dampers, one list member > suggested $300 for one. These guys seem to be a lot cheaper, are they > of use? > > http://www.spys.co.uk/revlimiter_racing16.htm > > Kevin Gibson > Based in Whitstable, England > > > ============================================================ > > This is the Python Mailinglist > > //www.freelists.org/list/python > > Listmaster: Jürgen Mages jmages@xxxxxx > > To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx > with 'unsubscribe' in the subject field. > > ============================================================ > > > >