[python] Re: dismantle Nexus Inter-8 Hub
- From: Stefan Bartels <sbartels@xxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Thu, 22 Mar 2012 20:38:17 +0100
Hi Gerald, I hoope this does the trick:
http://sheldonbrown.com/nexus8/
I love the Inter-8. Used hubs are not hard to come by, if repair should
prove impossible!
Stefan
Am 22.03.2012 20:11, schrieb Gerald:
Hi All,
well this is not actually a pure python topic - but it is about Python
Lowracer front wheel :-).
The Nexus Inter-8 Hub I use for my 20" Python freewheel in gear 1 to
5, gear 6 - 8 work OK.
The coaster break work in all gears. The adjustment of the pulley is
checked and seems to work OK.
Any suggestions?
I actually fear that the internals of the hub might be broken -
anybody knows were to find a guide how to dismantle and repair the hub?
Is this possible at all or is it just gone?
BR
Gerald
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
