[python] Re: dismantle Nexus Inter-8 Hub
- From: "familjen" <neikter@xxxxxxxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Fri, 23 Mar 2012 22:06:25 +0100
Hello!
I found this document on the net. It is for the Nexus Inter-7. I have opend
my Nexus inter-7, but I couldn't find the main course for the knocking noise
on all 7 gears. It was no problem to put i togethet again.
Best regards
Lars-Erik Neikter
----- Original Message -----
From: "Gerald" <bepb@xxxxxx>
To: "Python" <python@xxxxxxxxxxxxx>
Sent: Thursday, March 22, 2012 8:11 PM
Subject: [python] dismantle Nexus Inter-8 Hub
Hi All,
well this is not actually a pure python topic - but it is about Python
Lowracer front wheel :-).
The Nexus Inter-8 Hub I use for my 20" Python freewheel in gear 1 to 5,
gear 6 - 8 work OK.
The coaster break work in all gears. The adjustment of the pulley is
checked and seems to work OK.
Any suggestions?
I actually fear that the internals of the hub might be broken - anybody
knows were to find a guide how to dismantle and repair the hub?
Is this possible at all or is it just gone?
BR
Gerald
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jurgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
