[python] Re: making a jig -- again
- From: Dirk Bonne <dirk_bonne@xxxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Wed, 02 Nov 2005 22:26:15 +0100
Problem with the metal jig is the really heavyness and also the price
tag. But I could try a good router (fräzer) today, and it does drill
holes perdpendiculum. So my problems seem to be solved. Now I just need
to get lots of 10x1 and 12x1 the tubing, and I can start :-)
Dirk
On 11/02/2005 09:22 PM, Hillel Seltzer wrote:
>Take a look at these jig plans:
>
>http://www.wisil.recumbents.com/wisil/jig/bike_jig.htm
>
>---Hillel
>
>============================================================
>
>This is the Python Mailinglist at freelists.org
>
>Listmaster: Jürgen Mages jmages@xxxxxx
>
>To unsubscribe send an empty mail to
>python-request@xxxxxxxxxxxxx
>with 'unsubscribe' in the subject field.
>
>============================================================
>
>
>
>
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
