[raspberry-vi] Re: An Introduction.

  • From: "Jean-Claude Provost" <jc.provost@xxxxxxxxxxxxxx>
  • To: <raspberry-vi@xxxxxxxxxxxxx>
  • Date: Sat, 4 Aug 2018 11:28:59 -0400

Hithere,

I'malsoaham(E2FKP)&I'malsointeestedwhatyoucanfindout...FrlmwhereIstand,itseemsthattheinterfaceissomethingwecanrelativelyeasilywriteinPythonorsomethingelse...Mymainconcernwouldbetheaccessibilityofsomeserial(orUSBinterfacetotheactualradiohardwared.Onceweknowwecansendcommands&receivestatusesfromit,we'reinbusiness(unlessI'mmissingsomething).

Letmeknowwhatyoufindyou&ififwecanhelpyouwithanything,I'llgladlypitchin...

73's

Cheers,

-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx <raspberry-vi-bounce@xxxxxxxxxxxxx> On 
Behalf Of Chris Moore
Sent: August 2, 2018 16:34
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] Re: An Introduction.

Eric,
Welcome aboard!  I am also a ham.  I don’t know much about SDR radios, but my 
initial concern would be the user interface.  Chances are that most of it would 
be graphical which would probably shut us out.  If we could get at the radio 
controls from the console then we might stand a chance.
Let us know what you find out.

Chris, W1GM

On Jul 28, 2018, at 7:39 PM, Eric Oyen <eric.oyen@xxxxxxxxx> wrote:

Hello everyone, 
Brand new RaspberryPi owner here (acquired my kit from Fry’s Electronics this 
last month). The Pi is a Model 3b and I just acquired the last bit today in 
order to make it a complete running unit.

Btw, My name is Eric and I am a totally blind Linux/Windows/OS X user for 
more than 2 decades. I also happen to be one of the original founders of the 
Phoenix Linux Users Group (and as far as I know, only 1 of 2 blind 
individuals in the phoenix area even involved with linux let alone a 
RaspberryPi). 

Anyway, I hope to read some tips/tricks and a few other goodies for getting 
up and running using a VI enabled Raspian image.

Btw, what I am going to use my unit for is SDR using USB Dongles to create a 
radio receiver (basically 100 Khz to 5 Ghz inclusive). SO, if there are any 
Pi owners on here who are also hams, I would certainly appreciate the help.

Thanks

Eric Oyen
Callsign: n7zzt
Phoenix arizona

=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of 
the Foundation.

Mike Ray, list creator, January 2013


=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of the 
Foundation.

Mike Ray, list creator, January 2013


=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of the 
Foundation.

Mike Ray, list creator, January 2013

Other related posts: