Mike, Other than the pin-outs, what is the difference between the Rev 1 and the Rev 2? Thanks. Glenn ----- Original Message ----- From: "Michael A. Ray" <mike.ray@xxxxxxxxxxxxxx> To: <raspberry-vi@xxxxxxxxxxxxx> Sent: Saturday, March 16, 2013 6:18 PM Subject: [raspberry-vi] Easy Identification of Rev 2.0 boards and Rev 1.0 Hello list, I will be adding this to the wiki but I just thought I'd mention this here. The pin-outs of the GPIO header on your Raspberry Pi depends on the board revision number. Current boards are rev 2 or greater and all have the same pin-outs. Revision 1 is different. Holding your Raspberry Pi exactly as described in the 'Getting Started' page on the web-site, that is with the USB ports away from you and the card-holder closest to you; if there is a 2 millimetre mounting hole just to the left of the USB sockets you have a Rev 2 board. If not, it is Rev 1. You can find this hole with your thumb nail or the point of a pencil (with no power applied to the board. Mike -- Michael A. Ray Analyst/Programmer Witley, Surrey, South-east UK github username: cromarty raspberrypi.org username: cromarty Ham Radio Call-sign: G4XBF, licensed since 1982 'Entia non sunt multiplicanda praeter necessitatem' - Ockham's razor Raspberry VI: http://www.raspberryvi.org/ NVDA, the best free screen-reader in the world: http://www.nvda-project.org/ =========================================================== The raspberry-vi mailing list Archives: //www.freelists.org/archives/raspberry-vi Administrative contact: <mike.ray@xxxxxxxxxxxxxx> ----------------------------------------------------------- Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi Foundation. This list is not affiliated to the Raspberry Pi Foundation and the views and attitudes expressed by the subscribers to this list do not reflect those of the Foundation. Mike Ray, list creator, January 2013 =========================================================== The raspberry-vi mailing list Archives: //www.freelists.org/archives/raspberry-vi Administrative contact: <mike.ray@xxxxxxxxxxxxxx> ----------------------------------------------------------- Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi Foundation. This list is not affiliated to the Raspberry Pi Foundation and the views and attitudes expressed by the subscribers to this list do not reflect those of the Foundation. Mike Ray, list creator, January 2013