Now I have a pretty unusual error message after installing ilctts. I
wget piespeakup-1.0.0.tar.gz, then
tar xfz piespeakup-1.0.0.tar.gz
cd piespeakup-1.0.0
./configure
Error: Espeak_initialize was not found in libspeak.
Tried sudo ./configure and that produced the same results.
Also, sudo modprobe speakup_soft
And no luck.
On 12/30/16, Mike Ray <mike@xxxxxxxxxxxxxxx> wrote:
Hello===========================================================
I have updated the page at:
http://www.raspberryvi.org/stories/stuttering.html
With the installation instructions for both the OMX audio code library
and piespeakup.
You may need to refresh your browser cache.
I am about to remove the broken armv7 Arch image from the downloads page
but I will leave the armv6 image because it works on all versions.
I noticed that there is now a 64-bit Arch image for the Pi3, so I may
try that, but there is little benefit to be had from 64-bit code with
only a gigabyte of RAM.
Next job...write an Emacspeak server which uses the OMX code, and Rill
will be one happy lady.
I already have a BNF Bison parser written for the Emacspeak protocol,
just need to extend it a bit and interface it to OMX.
Mike
--
Michael A. Ray
Analyst/Programmer
Witley, Surrey, South-east UK
Eyes-free Linux:
http://eyesfreelinux.ninja/
Raspberry VI:
http://www.raspberryvi.org/
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.
Mike Ray, list creator, January 2013