Hello
I have tested the libilctts and piespeakup download and install
procedures on both Raspbian and Arch.
Unfortunately at the moment there is a problem booting the armv7 Arch
image, I think the problem is with the downloaded root file system.
But the armv6 image works OK.
There is another thing to do to get piespeakup to work after it is
installed and enabled, and that is to add the following line to the
bottom of /boot/config.txt :
dtparam=audio=on
Mike
--
Michael A. Ray
Analyst/Programmer
Witley, Surrey, South-east UK
Eyes-free Linux:
http://eyesfreelinux.ninja/
Raspberry VI:
http://www.raspberryvi.org/
===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.
This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of the
Foundation.
Mike Ray, list creator, January 2013
