[raspberry-vi] Re: images won't boot

  • From: Bryan Mckinnish <bryanbkm@xxxxxxxxx>
  • To: raspberry-vi@xxxxxxxxxxxxx
  • Date: Thu, 20 Oct 2016 16:11:31 -0400

Hi.
I finally got my pi running with the lite version of the latest raspean.
Do I need the full one to access sound and getting it to talk?
If I can get the lite version to talk, that would be cool as well.
Thanks.
Bryan Mckinnish

On 9/13/2016 2:50 PM, Darrel wrote:

If it is a model 3 then I doubt if it is booting. If you connect it to your
router with a cable and it is booting there will be a light next to the
ethernet port. If you have some light perception or a light detector it will
be on if it booted. It is well documented that most model 3s will not boot
the VI images. Download the Jessi image from the raspberry foundation site.
Then flash it like before. Then you will need to connect it to your router
or hub with an ethernet cable.  Then you will need to find what IP address
it was given by your router. Either access the configuration page of your
router and look for something like connected devices. Look for the host
raspberry or  You may be able to open a command prompt on your computer and
then ping raspberry. Then using Putty you should be able to SSH into it with
that ip address.
When you can do that, there is a patch which has been posted on here before
to get it talking. I can repost the directions on how to do this if you
can't find the previous post.


Tks,
Darrel

-----Original Message-----
From: raspberry-vi-bounce@xxxxxxxxxxxxx
[mailto:raspberry-vi-bounce@xxxxxxxxxxxxx] On Behalf Of Bryan Mckinnish
Sent: Tuesday, September 13, 2016 12:23 PM
To: raspberry-vi@xxxxxxxxxxxxx
Subject: [raspberry-vi] images won't boot

Hi.
I'm having a problem booting the raspberry pi.
I can't get either image to boot from the raspberry vi website.
I even tried earphones with it, but couldn't hear anything. I wonder if it
is booting and the volume is low, or if it even is booting?
Is there a way I can get it to automatically connect to my wifi network so I
can ssh into it and see what the problem is?
I used the latest win flash tool to flash the card. I also wonder if the
image was not written correctly.
Any suggestions will be helpful.
Thanks.
Bryan Mckinnish

===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and
attitudes expressed by the subscribers to this list do not reflect those of
the Foundation.

Mike Ray, list creator, January 2013


===========================================================
The raspberry-vi mailing list
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of 
the Foundation.

Mike Ray, list creator, January 2013



=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of the 
Foundation.

Mike Ray, list creator, January 2013

Other related posts: