[raspberry-vi] Re: pi model 3b+ as wireless repeater

  • From: Sean Murphy <mhysnm1964@xxxxxxxxx>
  • To: raspberry-vi@xxxxxxxxxxxxx
  • Date: Mon, 20 Aug 2018 20:04:29 +1000

All, I have an old raspberry version to PIE. I want to use it as a wireless 
router. I want it also to connect to hotel wireless networks so I can have my 
Google home or Amazon Echo with me while I travel. Any suggestions on how to do 
this easily.  One thought was to use my PC to connect to the hotel Wallace and 
have a physical ethernet cable to the raspberries. Then use the raspy wireless 
to connect to the Amazon Echo.  That’s it requires a bit of routine on the PC 
and on the Lennix box. 
The second option is to do it all on the Ravi which would probably be more 
easier. 



Please excuse any errors as I’m doing this by Siri dictation.
My experience is the part 

On 20 Aug 2018, at 12:42 am, Scott Granados <scott.granados@xxxxxxxxx> wrote:

You might also check out open mesh.org.  They use a pi like hardware and 
build small access points that can run in full mesh mode.  I don’t know if it 
runs on the pie with your own radios but they do sell small access points 
that are in the same cases as the pi and the boards look similar.  Mesh is 
where you want to be with WiFi, not repeaters.  Ideally you want a mesh 
system that uses the different nodes and forms the most optimal paths based 
on the environment.  At this time I run a much higher end Eero mesh system 
but I have used these open mesh modules to cover large areas for business 
applications so there should be no problems with this lower cost, open source 
solution.

Good luck


On Aug 18, 2018, at 2:37 PM, David Mehler <dave.mehler@xxxxxxxxx> wrote:

Hello,

I'm thinking about picking up two additional pi's model 3b+ and
deploying them as wireless repeaters. Given the quad core and the 1GB
of ram I assume this is doable?

What kind of network card is native wirelessly in the pi? I can add
another one but i'd rather keep this as self-contained as possible. Is
it 10/100/1000?

If I do this will I have any performance hits?

Thanks.
Dave.
=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of 
the Foundation.

Mike Ray, list creator, January 2013


=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of 
the Foundation.

Mike Ray, list creator, January 2013

=========================================================== 
The raspberry-vi mailing list 
Archives: //www.freelists.org/archives/raspberry-vi
Administrative contact: <mike.ray@xxxxxxxxxxxxxx>
-----------------------------------------------------------
Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi 
Foundation.

This list is not affiliated to the Raspberry Pi Foundation and the views and 
attitudes expressed by the subscribers to this list do not reflect those of the 
Foundation.

Mike Ray, list creator, January 2013

Other related posts: