Hi, Unfortunately, I forgot how I got into my RPI from the laptop, without first going through my old router. But when I do get in again, via SSH, I will need to set the RPI to automatically go into a Telnet session I believe. I have tried hooking my old notetaker, an Artic Braille Pad, from the 9-pin serial out, to the Ethernet line on the RPI. I have tried both standby and terminal modes on the Braille Pad with no luck. Maybe the serial settings are wrong, but I set the baud rate to 15,500, and 8, 1, which is the default, except for the baud rate, which is as fast as the notetaker can go. Does anyone know how I may get these two to talk with each other? Glenn =========================================================== The raspberry-vi mailing list Archives: //www.freelists.org/archives/raspberry-vi Administrative contact: <mike.ray@xxxxxxxxxxxxxx> ----------------------------------------------------------- Raspberry Pi and the Raspberry Pi logo are trademarks of the Raspberry Pi Foundation. This list is not affiliated to the Raspberry Pi Foundation and the views and attitudes expressed by the subscribers to this list do not reflect those of the Foundation. Mike Ray, list creator, January 2013