[torontocbm] Re: 1541 drive

  • From: Leif Bloomquist <leif@xxxxxxxxxxxxxxxx>
  • To: "torontocbm@xxxxxxxxxxxxx" <torontocbm@xxxxxxxxxxxxx>
  • Date: Mon, 12 Oct 2015 21:42:39 -0400

Frank, you are having the worst luck with hardware!

1541s are plentiful around here, I have a couple if needed, Joey and
TPUG have several.

-Leif


On Sun, Oct 11, 2015 at 9:36 PM, Frank Michielli <bigmanfrank@xxxxxxx> wrote:

Nope because drives spins for that second when you turn it off

_o/ Sent from IOS Outlook




On Sun, Oct 11, 2015 at 5:54 PM -0700, "Jeff Bourdeau"
<jeffobourdeau@xxxxxxxxx> wrote:

Perhaps the motor belt is snapped or fallen off?

On Oct 11, 2015, at 19:59, Frank Michielli <bigmanfrank@xxxxxxx> wrote:

Sorry my mistake. The drive boots up normally except the drive doesn't
spin. So yes access light does go off after boot and will go on when disk
access is requested.

_o/ Sent from IOS Outlook




On Sun, Oct 11, 2015 at 4:25 PM -0700, "Joseph Palumbo"
<dmarc-noreply@xxxxxxxxxxxxx> wrote:

"All on" is NOT normal....

The red light is a drive-access ligh,t and should go out after the power
cycle completes. If it stays on; then you likely need to change the 6502
chip which should be in a socket already. Swap that chip with a known good
one from your other PCB that you first used to identify that it was a PCB
problem.

________________________________
From: Frank Michielli <bigmanfrank@xxxxxxx>
To: torontocbm@xxxxxxxxxxxxx
Sent: Sunday, October 11, 2015 1:03 PM
Subject: [torontocbm] Re: 1541 drive

Lights are normal. All on.

The drive doesn't spin when the drive is turned on or when then disk is
accessed

The drive does spin when you turn off for that one second.

Also the turn latch to open and close, the plastic handle is broken


_o/ Sent from IOS Outlook

_____________________________
From: Joseph Palumbo <dmarc-noreply@xxxxxxxxxxxxx>
Sent: Sunday, October 11, 2015 12:34 PM
Subject: [torontocbm] Re: 1541 drive
To: <torontocbm@xxxxxxxxxxxxx>




What does the drive do or not do? at power up, does it pass okay or do
lights flash or stay on? does moter keep spinning or stop...or even start to
spin?

________________________________
From: Frank Michielli <bigmanfrank@xxxxxxx>
To: Toronto CBM List <torontocbm@xxxxxxxxxxxxx>
Sent: Monday, October 5, 2015 7:21 PM
Subject: [torontocbm] 1541 drive

Hey guys.

I'm looking for the main board for a 1541 as I am trying restore one. I
concluded that there is something wrong with the board as I swapped one out
of a working one.

Let me know and thanks!

_o/ Sent from IOS Outlook









Other related posts: