YMMV but for most people (including me ;-) cleaning and possibly a bit of light
sanding is all it takes and I think it's worth while to try that before
spending money on resurfacing the plungers.
For that, aside from the kits like the one you mention folks have used
rear-window-heater repair kits and also glued-on hole-punched foil disks. I've
used both on other keyboards, especially remote controls, but FWIW none of the
PETs I've worked on needed more than a good cleaning.
Maybe it depends on how and where the PETs have spent their lives; I've got
four on the bench right now; I'll let you know how they turn out ;-)
m
---- Original Message -----
From: Ben Kayfetz
To: torontocbm@xxxxxxxxxxxxx
Sent: Thursday, January 30, 2020 4:35 PM
Subject: [torontocbm] Re: Replacement key & springs for PET 2001-16N, and
optional back monitor panel
I re-and-re'd my keyboard and keys 3 times... Scrubbing away... each time it
got a bit better, but never perfect. Then I put my 4016 away for a few months
and when I broke it out again I was back to most keys not working. A year ago
I used circuit works keypad repair kit [CH-CW2605] and all is good as of today.
See here: https://youtu.be/7x-4590yWVY
circuit works keypad repair kit [CH-CW2605] review and Pet Keyboard fix
This is a review of ChemWik / circuit works Rubber keypad repair kit
[CH-CW2605] and how-to repair an aged Commodore Pet keyboard. circuit works
keypad repai...
youtu.be
Ben
------------------------------------------------------------------------------
From: torontocbm-bounce@xxxxxxxxxxxxx <torontocbm-bounce@xxxxxxxxxxxxx> on
behalf of Mike Stein <mhs.stein@xxxxxxxxx>
Sent: January 29, 2020 1:39 PM
To: torontocbm@xxxxxxxxxxxxx <torontocbm@xxxxxxxxxxxxx>
Subject: [torontocbm] Re: Replacement key & springs for PET 2001-16N, and
optional back monitor panel
Usually all it takes is a bit of a rub down of the pcb with a *soft* eraser
and a good cleaning of the pcb and the key contacts with alcohol; in stubborn
cases a *very light* sanding of the key stems with fine grade emery cloth does
the job. Unlike cheap remote controls it's very rarely necessary to coat the
key pads with anything.
I should have an apostrophe key and spring somewhere; I'm not clear whether
you also need an R key or just the spring?
m
----- Original Message -----
From: "Robert Lansdale" <lansd@xxxxxxxxxxx>
To: "John Roesner" <torontocbm@xxxxxxxxxxxxx>
Sent: Tuesday, January 28, 2020 9:00 PM
Subject: [torontocbm] Re: Replacement key & springs for PET 2001-16N, and
optional back monitor panel
> Hello John. On Tuesday, January 28, 2020, 6:49:27 PM, you wrote:
>
>> Amazon warehouse deal for 8.55, worked out to 12.55cad. I can order it
with my next amazon order and can mail it to you. Let me know what you think.
>
> Thanks for your interest and feedback. Just to be sure I am not missing
out on some unspoken context, what
> item are we exactly talking about for US$8.55? Are you in Toronto or
> go to the TPUG meetings?
>
>