[torontocbm] Re: uIEC/SD comments

  • From: "Daniel Kovacs" <danielkovacs@xxxxxxxxxxxxxx>
  • To: <torontocbm@xxxxxxxxxxxxx>
  • Date: Sun, 14 Dec 2008 17:10:06 -0500

Hi Jim;
It just comes up flashing green, and when I try to access it then it reports devivce not present.
I reassembled the origonal cable the way it was and all pins test fine for continuity. 

Dan
----- Original Message ----- From: "Jim Brain" <brain@xxxxxxxxxx> 
To: <torontocbm@xxxxxxxxxxxxx>
Sent: Sunday, December 14, 2008 4:49 PM
Subject: [torontocbm] Re: uIEC/SD comments



danielkovacs wrote:

I must have really screwed something up.  I connected
directly to IEC bus, powered the device up and all I got was
the green light on the uIEC flashing on and off, when I try
to access the device, I get "Device not present" error. Other things on the bus seem to work fine. Anyone have any 
ideas?  Have I fried my uIEC?


I doubt it.  That it is flashing tells me that it's doing something.

A couple questions:
* Does it come up flashing green? Or does it flash green when you try to access it? * Can you take a picture of the mod and send me it and a text description of the wiring? 

I'm sure we can sort it out.

Jim




--
No virus found in this incoming message.
Checked by AVG. Version: 7.5.552 / Virus Database: 270.9.17/1847 - Release Date: 12/13/2008 4:56 PM

Other related posts:

  1. Home
  2. torontocbm
  3. Archive
  4. 12-2008