Hi Joan Ann, Thank you for that clarification! I see now that there would be no need to "do a check" then? I found though that when I hit enter, it exited me back to where I was previously! A tip perhaps. All the best, Tony Sweeney.----- Original Message ----- From: "Joan Ann Brosnan" <kerrygirl18@xxxxxxxxx> To: <vip_students@xxxxxxxxxxxxx> Sent: Friday, November 23, 2007 8:34 PM Subject: [vip_students] Re: Reading numbers as digits! > Hi Tony > Glad this worked for you. > When you arrow through the numbers, each one seems as if it is checked > because they are radio buttons. > Radio buttons are used for choosing between a small number of options, when > only one of the options can be selected. The options are arranged in a list, > and next to each option is a radio button, which is a small white disc. The > selected option is indicated by a black dot in the centre of the white disk > next to that option. To change the selected options use UP or DOWN ARROW. > > > > Joan Ann. > > > > ----- Original Message ----- > From: "tonysweeney" <tonysweeney1@xxxxxxxxxx> > To: <vip_students@xxxxxxxxxxxxx> > Sent: Friday, November 23, 2007 8:13 PM > Subject: [vip_students] Re: Reading numbers as digits! > > > > Hi Joan > > Ann, > > > > Nice one! > > > > Interesting that when I landed on the numbers radio button it gave me four > > choices single, double full number and so on and Jaws said that they were > > all checked!! > > > > I did a check command on single digits and my problem is now resolved! > > > > A good tip to file away, not under "never to be found again" however! > > > > There are lots of options in that Jaws configuration indeed! > > > > Many thanks. > > > > Tony Sweeney. > > ----- Original Message ----- > > From: "Joan Ann Brosnan" <kerrygirl18@xxxxxxxxx> > > To: <vip_students@xxxxxxxxxxxxx> > > Sent: Friday, November 23, 2007 7:41 PM > > Subject: [vip_students] Re: Reading numbers as digits! > > > > > >> Hi Tony > >> To get Jaws to read phone numbers as single digits, do the following: > >> 1. Press insert and f2 and down arrow to the configuration manager and > >> press enter. > >> 2. Press control, shift and D to go to the default settings. > >> 3. Press alt and S and down arrow to text processing and press enter. > >> 4. Tab to number processing and use your up/down arrow keys to go > >> through > >> the choices. Choose single digits. > >> 5. Tab to Ok and press enter. > >> 6. Press Control and S to save the changes. > >> 7. Alt f4 to exit from the configuration manager. > >> > >> Joan Ann. > >> > >> ----- Original Message ----- > >> From: "tonysweeney" <tonysweeney1@xxxxxxxxxx> > >> To: "students list" <vip_students@xxxxxxxxxxxxx> > >> Sent: Friday, November 23, 2007 6:46 PM > >> Subject: [vip_students] Reading numbers as digits! > >> > >> > >> > Hi All, > >> > > >> > Feeling you had this question before from a fellow lister. > >> > > >> > Anyway, how can I read telephone numbers as digits with Jaws? > >> > > >> > I know I open the Jaws manager with insert and j, but where to then? > >> > > >> > Any answers appreciated. > >> > > >> > Tony. > >> > > >> > > >> > > >> > >> > >> > > > > > >