You shouldn't need to implement PROPOSEDATAFORMAT. What does KS Studio show for the exposed data ranges of your driver? -----Original Message----- From: wdmaudiodev-bounce@xxxxxxxxxxxxx [mailto:wdmaudiodev-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Bielik Sent: Friday, October 29, 2010 9:38 AM To: wdmaudiodev@xxxxxxxxxxxxx Subject: [wdmaudiodev] Re: Multichannel ? Robert Bielik skrev 2010-10-29 09:36: > I have a 5.1 capable USB device which does open up in 6 ch mode, i.e. the > demo wav plays correctly. So WMP does the right thing, now I only > need to figure out how to make it do the right thing with my VAD... Ok, searching the archives I came across KSPROPERTY_PIN_PROPOSEDATAFORMAT. My VAD is a bit "oldish", based on an earlier WDK, so I haven't implemented any handler for KSPROPERTY_PIN_PROPOSEDATAFORMAT. So I did this, but it fails directly at row 909 (reference C:\WinDDK\7600.16385.0\src\audio\msvad\simple\minwave.cpp). Ideas ? TIA /Rob ****************** WDMAUDIODEV addresses: Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx URL to WDMAUDIODEV page: http://www.wdmaudiodev.com/ ****************** WDMAUDIODEV addresses: Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx URL to WDMAUDIODEV page: http://www.wdmaudiodev.com/