[wdmaudiodev] Re: Need help in wave test failure.
- From: Tim Roberts <timr@xxxxxxxxx>
- To: "wdmaudiodev@xxxxxxxxxxxxx" <wdmaudiodev@xxxxxxxxxxxxx>
- Date: Thu, 13 Feb 2014 09:54:51 -0800
Gaurav Khuntale wrote:
>
> I am working on audio driver based on WaveCyclic port driver. I am
> getting following failure in wave test,
I'm not sure you're interpreting the error message correctly, although I
also could be wrong. Consider:
> Standard Streaming\Rendering Pin Tests\Streaming buffer from different
> threads
> Successfully instantiated KSPIN_DATAFLOW_IN pin
> Submitting 1600 bytes to the pin
> ...
> pin position pos2.playoffset = 1440 , pos1.playOffset = 1600
> FAIL: Position (1600) is less than the amount of data streamed (3200).
>
> While investigating about above failure, i got to know that my driver
> is not getting total data ( 3200 bytes in above case ) that test sends.
Note that the log says "Submitting 1600 bytes to the pin". It makes me
wonder if the error is trying to say that someone is reporting that 3200
bytes were streamed, when in fact only 1600 were sent.
What's the data format? Is it 16kHz? Stereo? 16-bit? I'm wondering
if, somewhere, you have a confusion between bytes and samples.
I'm merely speculating, however.
> Also when exactly CopyTo and GetPosition method gets called ?
CopyTo is called when there is new data to transfer. GetPosition is
polled quite often so the audio subsystem can monitor the real-time
state of the stream.
--
Tim Roberts, timr@xxxxxxxxx
Providenza & Boekelheide, Inc.
******************
WDMAUDIODEV addresses:
Post message: mailto:wdmaudiodev@xxxxxxxxxxxxx
Subscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=subscribe
Unsubscribe: mailto:wdmaudiodev-request@xxxxxxxxxxxxx?subject=unsubscribe
Moderator: mailto:wdmaudiodev-moderators@xxxxxxxxxxxxx
URL to WDMAUDIODEV page:
http://www.wdmaudiodev.com/
Other related posts:
