I would also add some distortion to the telephone effect.
Duplicate the track, apply a saturation or distortion (build-in)
effect, squash it with a compressor and mix it with the original.
That is, adapt the gain on that track (Shift+Alt+Up/Down).
Robert
On 10/04/2020, Brian Williams <werewolvesdad@xxxxxxxxx> wrote:
On a similar theme I have a wildlife recording made outside. What filter
would I use to try and get rid of as much wind noise as possible.
B
Brian
On 10 Apr 2020, at 10:38 am, David Bailes <drbailes@xxxxxxxxx> wrote:
Hi Marius,
When using the graphic equaliser, an alternative to changing the individual
frequencies is to use one of the presets. To do this, tab to the manage
button and press it. On the menu which opens, open the factory presets sub
menu, and choose telephone.
David.
On Fri, 10 Apr 2020 at 07:45, Andrew Downie <access_tech@xxxxxxxxxxxxxx>
wrote:
Hi Marius
Another option for getting the telephone effect is Graphic Equaliser under
Audacity’s effects menu. I suggest starting by pulling down all
frequencies below 200 or so to minus 20 and doing the same with
frequencies above – say – 3000. Adjust values until you get the sound you
want.
When applying reverb in Audacity I like to duplicate the track and apply
the reverb to one of them. That lets you adjust levels of both until you
get the amount of reverb you want.
For recording the band, it is most unlikely that you can use Audacity to
record onto more than two channels at once. To do that you need a quite
sophisticated sound card at very least. You can use the mixer to spread
the band across the two channels, but usually will not be able to put each
instrument to its own channel.
The Audacity manual has a detailed section on this topic.
Andrew
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Marius Coetzee
Sent: Friday, 10 April 2020 3:26 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: EFFECTS
Thank you Ted. I want to make sure where can I change the bit rate?
Another question: if I have a band, for example bass guitar, guitar and
keyboard. I plug in all three instruments to the mixer. The band play
together, but I want to record each instrument on his own track. As far I
know you need a specific soundcard, but how did record it? To press ®
will not work.
Marius
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of tr.galanos@xxxxxxxxx
Sent: Friday, 10 April 2020 02:35
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: EFFECTS
To achieve the telephone effect, you can lower the sample bit rate.
To get the second effect, you use Reverb. There are presets in Audacity.
Use the large room or cathedral option.
Ted Galanos
www.GalanosConsulting.com/
Audio Technician for The Blind Perspective.
Phone: 713-298-1846
Zoom: 9541851664 by invitation only!
Skype: tedster1
Social Media:
Facebook .
Twitter.
Youtube.
Use Rakuten and earn cash back when shopping.
Start investing with @Stash today! Get $5 to invest when you click here.
Please consider donating to my Texas ABLE program.
https://www.ablegifting.com/TX/K9L8A2>
Thanks and God bless you!
"Now faith is the substance of things hoped for, the evidence of things
not seen." - Hebrews 11:1
From: audacity4blind-bounce@xxxxxxxxxxxxx
<audacity4blind-bounce@xxxxxxxxxxxxx> On Behalf Of Marius Coetzee
Sent: Thursday, April 9, 2020 7:44 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] EFFECTS
Good day
I am new on this mailing list and did not new if my question was already
discussed.
I have a vocal recording, but want to put it threw a filter so that it
sound that the person is talking threw a telephone to you.
My second question is basically on the same. I have a vocal recording and
want to put some echoes on the recording so that it sound that person is
standing in a big hall or auditorium.
What can I do to get this type of effects?
Marius
<image001.jpg>
Virus-free. www.avg.com
