[bksvol-discuss] Re: Corrections list
- From: "J.M." <inlovewithchrist@xxxxxxxxxxxxx>
- To: <bksvol-discuss@xxxxxxxxxxxxx>
- Date: Thu, 19 Aug 2004 16:05:01 -0700
Hi, Gary. There are times, though, of course, when they don't give the
particular letters I'm getting, and I'm just never sure which way to go, but
thanks for the tip. I'll definitely remember that for the next thing I scan.
I knew about increasing or decreasing a little at a time...I just never know
which way to go. Thanks again, and take care.
Julie Morales
Email and Windows/MSN Messenger:
inlovewithchrist@xxxxxxxxxxxxx
----- Original Message -----
From: "Gary Petraccaro" <garyp130@xxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Monday, August 16, 2004 9:17 PM
Subject: [bksvol-discuss] Re: Corrections list
Good thing is, that's in the K1000 help system in case you forget. The rn
in place of m means you must lower your brightness setting. the m for rn
means you must rais it. Think of it like this and maybe it will stick in
your mind. When you want more letters from fewer, you raise the setting.
When you want fewer letters, you lower the setting. 3 to 5 should do it at
a time.
----- Original Message -----
From: "J.M." <inlovewithchrist@xxxxxxxxxxxxx>
To: <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Monday, August 16, 2004 3:18 PM
Subject: [bksvol-discuss] Re: Corrections list
> And the frustration for me when it comes to brightness is not knowing
> whether it's too high or too low. I have a little vision so have some
> concept of the printed letters, but not enough to know which way I need to
> go to make an acceptable scan. That's just one of the areas in which I'm
> still trying to learn, as I commented in a message to Shelley. Take care.
> Julie Morales
> Email and Windows/MSN Messenger:
> inlovewithchrist@xxxxxxxxxxxxx
> ----- Original Message -----
> From: "Mary Otten" <maryotten@xxxxxxxxxxxxx>
> To: <bksvol-discuss@xxxxxxxxxxxxx>
> Sent: Sunday, August 15, 2004 9:51 PM
> Subject: [bksvol-discuss] Re: Corrections list
>
>
> Tlie for the is a symptom that your brightness is set too light, while die
> for the is the opposite problem. The frustration comes in when you get a
> book with varying contrast and paper, such that on one page, you find an
> error symptomatic of too dark, while the next page yields an error
> symptomatic of too light.
> Mary
>
>
>
>
>
>
>
Other related posts:
