[ddots-l] Re: Any suggestions on a multiple wireless mic setup
- From: HF <hermanfermin@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 21 Aug 2007 07:39:49 -0400
Start your research at www.mixonline.com
Here's a link to an article about top of the line Wireless systems
http://mixonline.com/products/buyersguides/audio_topoftheline_wireless_microphone/index.html
HF
----- Original Message -----
From: John Esak
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, August 20, 2007 11:59 PM
Subject: [ddots-l] Any suggestions on a multiple wireless mic setup
Hi all,
I now this is a little off topic to Sonar, Dancing Dots and the usual
recording talk here, but I figured I would tap all the wizard brains here
anyway.
I need to do some recordings (and some live performances) with several
wwireless lapel mics. I want to be able to do up to 6 (or at worst case 5)
separate microphones simultaneou7sly. Is there a system like this out there?
Will I have to use a couple different 3 channel setups? I think I recently saw
some wireless stuff with 256 available channels, but it seemed there was a
limitation of two or three simultaneous mics.
I don't need music quality, but highest possible voice quality is required.
I want either the mic receiver/mixer to be able to feed a recording line
level input, and also I will use this for a PA feed. It would be spectacular
if I could throttle back the output of the mic/receiver/mixer to feed the mic
input of a high quality camera like a Canon G2.
I need this for a Halloween presentation, so I want to start searching for
the right choice soon.
I'm guessing I'm going to have to pay some pretty hefty bucks for such a
system. Don't consider the price when making any suggestions, but do send
along any ideas for *where* to buy this stuff. I was going to look at big music
stores like ZZounds or Musician's Friend. Let me know if you know a specific
place to get the system and mics.
Thanks in advance for any ideas. Please feel free to answer directly to
john@xxxxxxxxx privately if the list is the wrong place for this kind of thread.
John
Other related posts:
