Yes, that's possible. download Bryan Smart's podcast from
www.dancingdots.com and forward till you get to the part where he
talks about the matrix view. He did an excellent job demonstrating the
matrix view. You can then read the tutorial to get a better idea of
how to do it. Lastly you can experiment with it and you will
understand it.
The matrix view is organized into columns and cells wich you can add
audio to them. You can trigger entire columns and swop out cells with
a different loop or nothing.
Note, you can also coppy and paste. For example record 4 bars of a
drum beat and paste it over where you want it. If you change your mind
and don't want it in the beginning just cut it out. I typically start
with the hook/corus where a lot of activity is going on with all
instruments. Then I decide how I want the intro and build the track to
the corus by taking certain elements of the song out and moving to
proper location. That is how I start, and of cource get more ideas and
improvise here and there.
On 8/19/13, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
> hi,
> So I'm guessing that you have to record everything in your project first ,
> put it into loops and then put it into the matrix view? What about if you
> wanted a long intro to a song, put a drum
loop into a song for about 4 bars
> and then take it out again, is it possible to do something like that? Here
> is an example..
> http://youtu.be/Eq2pJJlUDys
>
> Sent from my iPhone
>
> On Aug 19, 2013, at 9:50 PM, Aidan <aidan.smarttalk@xxxxxxxxx> wrote:
>
>> Hi, yes with CakeTalking installed it is defnitly accessible, the only
>> thing I'm not sure of, and wich is a problem for me, is that you con't
>> record loops and build them from scratch in the maytricks view, you
>> must record your project and use the data you recorded to put that
>> into loops. That is one thing the roland fantum can do, you can go
>> into patten moad and record an build your pattens rite there without
>> recording in the main project. Hope this helps.
>>
>> On 19/08/2013, josh stundon <joshstundon@xxxxxxxxx> wrote:
>>> Hi All.
>>>
>>> I was just wondering if the matrix view is accessible with sonar 8.5
>>> producer? How does the matrix view work? Also, if it doesnt work is
>>> there
>>> an alternative way to arrange your music?
>>>
>>> Kind regards,
>>>
>>> Josh
>>
>>
>> --
>> Facebook: m.facebook.com/aidan.maher92
>> Skype: andries4451
>> Twitter: smarttalk7
>> Audioboo: www.audioboo.com/DjSpotlight
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>
--
Efren Chavez
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
