[ddots-l] Re: Plextalk Pocket was Re: Live gigs <additional comments>
- From: Ben Humphreys <brh@xxxxxxxxxxxxxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Tue, 27 Aug 2013 06:44:52 -0400
Mike,
Are you saying it's possible to have the Plextalk Pocket voice
guidance routed to the Plextalk external speaker and the playing WAV
file routed to the external headphone jack?
Thanks
Ben
At 08:40 PM 8/17/2013, you wrote:
Jim,
One thing I forgot to mention, and this will be a personal
preference, and that is that I prefer to use uncompressed audio for
live performances. If you have a player that can read 16 or 24-bit
Wave files, etc, I think you'll find that the overall sound of your
setup will be superior - especially if you'll eventually be getting
into a decent sound system. A lot of folks are using good quality
MP3 or WMA files, but if you're doing things that have a wide range
of frequencies and so forth, you might want to consider rendering
your tracks to an uncompressed format. The duo I mentioned in my
last message has a player that can read 24-bit Wave files, and they
store their data on an SD card; and I do the same thing too. Believe
it or not, I use the Plextalk Pocket for my player. It'll read
24-bit Wave files; the only thing I have to be careful of is that
the voice guidance isn't too loud. I don't know of any of the other
brands of talking players/recorders out there have features that
allow you to have the voice not routed through the outputs. Perhaps
someone on the list may have additional info on that one.
Hope this helps.
Mike
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the
immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
