Hi,When you use a instrument, by standar already comes with some fx, it's more like, jazz club, hall, concert hall, etc...
Change the first parameter control of the inspector pain, the reverb. or if you want, the room size.
I also use external reverbs, if you are putting a perfect space reverb, i advice you to change the first inspector pain control to zero, you get a dry instrument sound, check the result!
My opinian: If I will gonna make un entire song only or most of the instruments are from the Garritan librarys, so it's ok to use the same Fx, hall, jazz club, concert hall, etc... if my objective of course is to get the impression of that all instruments are playing in the same space.
If i want to use one or more Garritan instruments in one of my song, so, through the inspector i change it to dry sound and use other reverb. All depends of our creativity and taste of course!
best regards, Rui Vilarinho----- Original Message ----- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, February 16, 2012 10:38 PM Subject: [ddots-l] Re: a message for rooi
I'm not in front of my daw right now, but I'll check it out when I get achance. I ended up using a convolution reverb from perfect space on the harp obo and cello and it worked out just fine. I really liked the way it turnedout, but I really would like to access the affects so I'll definitely be writing back. Thanks much man. May the Peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Website http://www.nevillepeter.com Email neville@xxxxxxxxxxxxxxxx Phone 407-222-4488 Web store http://www.nevillepeter.com/store -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of Rui Vilarinho Sent: Thursday, February 16, 2012 4:30 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: a message for rooi Hi Neville,I'll gonna tried to explain what is going on with myArea player plugin set,this is the way i use it! That's normal, because Jaws dont say what is appearing at the screen. If all is correct, the hotkeys are working.you will need to use the Jaws cursor. If you change for Jaws cursor, you will find most of those displayed information, like the fx reverb, at the botton of the screen.so, open the Garritan library, certify the the right set is active, and withJaws cursor check all screen. Then, press those hotkeys, then with the Jaws cursor look at the screen what is changing! Do you find diferent and new stuff? Note: At first, you are at the mixer area, also if you press other hotkey and you need To come back to the main Area, press the mixer hotkey. Is where you find the empty word, press it and you open a sub-menu, where you choose one of the library instrument.Also, you find the channel plus the output buttons. (the output is set to A as standard, if yu press the A letter you can choose at 8 diferent outputs).With the Fx hotkey! again, with Jaws cursor, go to the end of the screen andNote that if you press, per example at some words, like a reverb name, you will open a sub-menu, where you can change for another reverb.Tip: if you open that particulary midi track inspector, the first control isthe reverb amount. Note: all sub-menus are very accessible, no need to use Jaws cursor, justthe firsts hotkeys, if not the set will be full of hotkeys,right? but, withtime will gonna improve for sure. Check it! i'll be here to assist you. regards, Rui Vilarinho ----- Original Message ----- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, February 16, 2012 3:09 PM Subject: [ddots-l] a message for rooiHello rooi, I have downloaded and tried the HSC set you made for the Aria player. I don't know why, but for some reason the key combinations are not working or it doesn't seem like anything happens when I use them. I can access the list of key strokes by pressing Ault control shift f 1, but even when I choose one from the list and press enter, nothing happens. do you have any suggestions? Thanks much for any help you can give me. May the Peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Website http://www.nevillepeter.com Email neville@xxxxxxxxxxxxxxxx Phone 407-222-4488 Web store http://www.nevillepeter.com/store PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faqPLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq