[ddots-l] Re: a message for rooi
- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 20 Feb 2012 13:30:54 -0500
Will I have to insert the Aria player on an audio track to do this or can I
access the parameters from the midi track of the soft synth?
May the Peace of God which passes all understanding guard your heart and
mind in Christ Jesus. God bless you!
Website http://www.nevillepeter.com
Email neville@xxxxxxxxxxxxxxxx
Phone 407-222-4488
Web store http://www.nevillepeter.com/store
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Rui Vilarinho
Sent: Thursday, February 16, 2012 7:19 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: a message for rooi
Hi,
When you use a instrument, by standar already comes with some fx, it's more
like, jazz club, hall, concert hall, etc...
Change the first parameter control of the inspector pain, the reverb. or if
you want, the room size.
I also use external reverbs, if you are putting a perfect space reverb, i
advice you to change the first inspector pain control to zero, you get a dry
instrument sound, check the result!
My opinian: If I will gonna make un entire song only or most of the
instruments are from the Garritan librarys, so it's ok to use the same Fx,
hall, jazz club, concert hall, etc... if my objective of course is to get
the impression of that all instruments are playing in the same space.
If i want to use one or more Garritan instruments in one of my song, so,
through the inspector i change it to dry sound and use other reverb. All
depends of our creativity and taste of course!
best regards,
Rui Vilarinho
----- Original Message -----
From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, February 16, 2012 10:38 PM
Subject: [ddots-l] Re: a message for rooi
> I'm not in front of my daw right now, but I'll check it out when I get a
> chance. I ended up using a convolution reverb from perfect space on the
> harp
> obo and cello and it worked out just fine. I really liked the way it
> turned
> out, but I really would like to access the affects so I'll definitely be
> writing back. Thanks much man.
>
> May the Peace of God which passes all understanding guard your heart and
> mind in Christ Jesus. God bless you!
>
> Website http://www.nevillepeter.com
>
> Email neville@xxxxxxxxxxxxxxxx
>
> Phone 407-222-4488
>
> Web store http://www.nevillepeter.com/store
>
>
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
> On
> Behalf Of Rui Vilarinho
> Sent: Thursday, February 16, 2012 4:30 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: a message for rooi
>
> Hi Neville,
>
> I'll gonna tried to explain what is going on with myArea player plugin
> set,
> this is the way i use it!
>
> That's normal, because Jaws dont say what is appearing at the screen.
> If all is correct, the hotkeys are working.you will need to use the Jaws
> cursor.
> If you change for Jaws cursor, you will find most of those displayed
> information, like the fx reverb, at the botton of the screen.
> so, open the Garritan library, certify the the right set is active, and
> with
> Jaws cursor check all screen.
> Then, press those hotkeys, then with the Jaws cursor look at the screen
> what is changing! Do you find diferent and new stuff?
>
> Note: At first, you are at the mixer area, also if you press other hotkey
> and you need To come back to the main Area, press the mixer hotkey.
>
> Is where you find the empty word, press it and you open a sub-menu, where
> you choose one of the library instrument.
> Also, you find the channel plus the output buttons. (the output is set to
> A
> as standard, if yu press the A letter you can choose at 8 diferent
> outputs).
>
> With the Fx hotkey! again, with Jaws cursor, go to the end of the screen
> and
> Note that if you press, per example at some words, like a reverb name, you
> will open a sub-menu, where you can change for another reverb.
>
> Tip: if you open that particulary midi track inspector, the first control
> is
> the reverb amount.
>
> Note: all sub-menus are very accessible, no need to use Jaws cursor, just
> the firsts hotkeys, if not the set will be full of hotkeys,right? but,
> with
> time will gonna improve for sure.
>
> Check it! i'll be here to assist you.
>
>
> regards,
> Rui Vilarinho
>
> ----- Original Message -----
> From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, February 16, 2012 3:09 PM
> Subject: [ddots-l] a message for rooi
>
>
>> Hello rooi,
>> I have downloaded and tried the HSC set you made for the Aria player. I
>> don't know why, but for some reason the key combinations are not working
>> or
>> it doesn't seem like anything happens when I use them. I can access the
>> list
>> of key strokes by pressing Ault control shift f 1, but even when I choose
>> one from the list and press enter, nothing happens. do you have any
>> suggestions? Thanks much for any help you can give me.
>>
>> May the Peace of God which passes all understanding guard your heart and
>> mind in Christ Jesus. God bless you!
>>
>> Website http://www.nevillepeter.com
>>
>> Email neville@xxxxxxxxxxxxxxxx
>>
>> Phone 407-222-4488
>>
>> Web store http://www.nevillepeter.com/store
>>
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
