Hi, Glad you access the Fx.You understood very well, first choose the instrument, the channel plus the output, then if you will gonna mix with a Garritan reverb, use the hotkey and with the Jaws cursor go down and choose one of the several reverbs. Than, to chage how much you want of reverb, go to the midi track inspector and make the amount reverb changes. All instruments, by standard comes already with some reverb amount,so, You are suppose to ear some smooth room reverb, , not a lot. though in the midi track,try to change the first control parameter, change it to 127 and you ear a lot of room reverb, change it to 0 and what you get is a dry sound, better to mix in my opinian!
best regards, Rui Vilarinho----- Original Message ----- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, February 20, 2012 6:28 PM Subject: [ddots-l] Re: a message for rooi
Hello Rooi, I was able to get in to the affects menu and change the reverb type, but I heard nothing after changing. I didn't know that I could change the reverbamount from the inspector so I'll try that and tell you what happens. Thanksmuch for writing me back. So if I'm understanding you clearly, I change the reverb type by using thesets you provided and then I go to the inspector to change how much of it Iwant? Is that what you're saying? May the Peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Website http://www.nevillepeter.com Email neville@xxxxxxxxxxxxxxxx Phone 407-222-4488 Web store http://www.nevillepeter.com/store -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of Rui Vilarinho Sent: Thursday, February 16, 2012 4:30 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: a message for rooi Hi Neville,I'll gonna tried to explain what is going on with myArea player plugin set,this is the way i use it! That's normal, because Jaws dont say what is appearing at the screen. If all is correct, the hotkeys are working.you will need to use the Jaws cursor. If you change for Jaws cursor, you will find most of those displayed information, like the fx reverb, at the botton of the screen.so, open the Garritan library, certify the the right set is active, and withJaws cursor check all screen. Then, press those hotkeys, then with the Jaws cursor look at the screen what is changing! Do you find diferent and new stuff? Note: At first, you are at the mixer area, also if you press other hotkey and you need To come back to the main Area, press the mixer hotkey. Is where you find the empty word, press it and you open a sub-menu, where you choose one of the library instrument.Also, you find the channel plus the output buttons. (the output is set to A as standard, if yu press the A letter you can choose at 8 diferent outputs).With the Fx hotkey! again, with Jaws cursor, go to the end of the screen andNote that if you press, per example at some words, like a reverb name, you will open a sub-menu, where you can change for another reverb.Tip: if you open that particulary midi track inspector, the first control isthe reverb amount. Note: all sub-menus are very accessible, no need to use Jaws cursor, justthe firsts hotkeys, if not the set will be full of hotkeys,right? but, withtime will gonna improve for sure. Check it! i'll be here to assist you. regards, Rui Vilarinho ----- Original Message ----- From: "Neville Peter" <neville@xxxxxxxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, February 16, 2012 3:09 PM Subject: [ddots-l] a message for rooiHello rooi, I have downloaded and tried the HSC set you made for the Aria player. I don't know why, but for some reason the key combinations are not working or it doesn't seem like anything happens when I use them. I can access the list of key strokes by pressing Ault control shift f 1, but even when I choose one from the list and press enter, nothing happens. do you have any suggestions? Thanks much for any help you can give me. May the Peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Website http://www.nevillepeter.com Email neville@xxxxxxxxxxxxxxxx Phone 407-222-4488 Web store http://www.nevillepeter.com/store PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faqPLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq