[ddots-l] Re: any ideas for the follwoing? Re: fading effects in and out?
- From: "Jeff Molzow" <jeff@xxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 10 Aug 2007 04:56:57 -0500
Hello Stacey:
This may seem too simple, but what if you were to have track 1 with the
clear guitar fade out inversely as track 2 with the distorted guitar came
up. This should create a nice cross-fade??
Hth
Jeff
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Stacy Bleeks
Sent: Friday, August 10, 2007 3:50 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: any ideas for the follwoing? Re: fading effects in
and out?
Thanks for the tip Gord, as you know I wasnt' able to get anywhere with the
CW amp syn automation. Can you give me a little more detail or point me in
the right direction. I am assuming you are talking about the alien
connection soft synth? I can't get anything out of it.
Any ideas?
what I have going is the Syn 2 soft synth and I would like it to transition
from dry to distorted over the span of 8 bars.
Thanks!
Stacy
----- Original Message -----
From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, August 09, 2007 10:12 PM
Subject: [ddots-l] Re: fading effects in and out?
> You wouldn't be able to do that with the amp sim because that is a very
> old plug that is not automatable. You would need to get another amp
> simulator like alien connections or something.
> Gord
> ----- Original Message -----
> From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, August 09, 2007 2:21 PM
> Subject: [ddots-l] fading effects in and out?
>
>
>> Is it possible to fade an effect in or out of a portion of a given track?
>>
>>
>> For example,if I have a track with clean guitar and use the distortion
>> amp sym effect, is it possible to slect part of the track and have the
>> effect build from dry to as wet as it can get?
>>
>> I want the distortion to build from clean to dirty (if that makes sense).
>>
>> Thanks.
>>
>> Stacy
>>
>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> Subject:- faq
>>
>>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
