[ddots-l] Re: any ideas for the follwoing? Re: fading effects in and out?
- From: "Luis Elorza" <luiselorza@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 10 Aug 2007 11:31:24 -0700
a simple way would be to copy the track and apply the distortion
destructively to it then do a fade in to the distortion track and mix both
tracks.
----- Original Message -----
From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Friday, August 10, 2007 1:49 AM
Subject: [ddots-l] Re: any ideas for the follwoing? Re: fading effects in
and out?
> Thanks for the tip Gord, as you know I wasnt' able to get anywhere with
> the CW amp syn automation. Can you give me a little more detail or point
> me in the right direction. I am assuming you are talking about the alien
> connection soft synth? I can't get anything out of it.
>
> Any ideas?
>
> what I have going is the Syn 2 soft synth and I would like it to
> transition from dry to distorted over the span of 8 bars.
>
> Thanks!
>
> Stacy
>
> ----- Original Message -----
> From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Thursday, August 09, 2007 10:12 PM
> Subject: [ddots-l] Re: fading effects in and out?
>
>
>> You wouldn't be able to do that with the amp sim because that is a very
>> old plug that is not automatable. You would need to get another amp
>> simulator like alien connections or something.
>> Gord
>> ----- Original Message -----
>> From: "Stacy Bleeks" <sbleeks@xxxxxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Thursday, August 09, 2007 2:21 PM
>> Subject: [ddots-l] fading effects in and out?
>>
>>
>>> Is it possible to fade an effect in or out of a portion of a given
>>> track?
>>>
>>>
>>> For example,if I have a track with clean guitar and use the distortion
>>> amp sym effect, is it possible to slect part of the track and have the
>>> effect build from dry to as wet as it can get?
>>>
>>> I want the distortion to build from clean to dirty (if that makes
>>> sense).
>>>
>>> Thanks.
>>>
>>> Stacy
>>>
>>>
>>> ** To leave the list, click on the immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>>> ** If this link doesn't work then send a message to:
>>> ** ddots-l-request@xxxxxxxxxxxxx
>>> ** and in the Subject line type
>>> ** unsubscribe
>>> ** For other list commands such as vacation mode, click on the
>>> ** immediately-following link:-
>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>>> Subject:- faq
>>>
>>>
>> ** To leave the list, click on the immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
>> ** If this link doesn't work then send a message to:
>> ** ddots-l-request@xxxxxxxxxxxxx
>> ** and in the Subject line type
>> ** unsubscribe
>> ** For other list commands such as vacation mode, click on the
>> ** immediately-following link:-
>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
>> Subject:- faq
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
