[ddots-l] Re: questions on vocal and hiden track
- From: Patrick Kelly <thetricksta@xxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Tue, 30 Mar 2010 12:19:42 -0500
I did it in the go to track dialog and it said track 24b is hidden. To
unhide it, go to the track manager dialog
On 3/30/10, Kevin Gibbs <kevjazz@xxxxxxxxx> wrote:
> Was it part of a folder? Some folders can't be seen when you arrow down to
> them but only up, I think.
> Kevin
>
> -----Original Message-----
> From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
> Behalf Of Patrick Kelly
> Sent: Tuesday, March 30, 2010 12:03 PM
> To: ddots-l@xxxxxxxxxxxxx
> Subject: [ddots-l] Re: questions on vocal and hiden track
>
>
> I tried arrowing down to the track that was hidden after being on the
> previous track, and didn't see it. It was closed in the treeview but it was
> checked in the track list. Any ideas?
>
> On 3/29/10, Robert Hall <truecut@xxxxxxxxx> wrote:
>> Patrick, You can pan a mono track. Just record the track first as a
>> mono track and you can worry about the pan later, because it doesn't
>> have to be panned at the time of recording. Hopes this helps Robert.
>> ----- Original Message -----
>> From: "Patrick Kelly" <thetricksta@xxxxxxxxx>
>> To: <ddots-l@xxxxxxxxxxxxx>
>> Sent: Monday, March 29, 2010 7:48 PM
>> Subject: [ddots-l] Re: questions on vocal and hiden track
>>
>>
>> is that using two mics? Or how are you doing it? I thought you
>> couldn't pan a mono track
>>
>> On 3/29/10, Jörgen Hansson <hansson.jogge@xxxxxxxx> wrote:
>>> Hi patrick!
>>> well, in this case I am using the pan slider in sonar and just listen
>>> to where I wanna have the backing vocals if I want them right or
>>> left. Regards, Jörgen Hansson!
>>> Tel +46 703-601296
>>> www.jorgenhansson.com
>>> skype: djtropical4532
>>> ----- Original Message -----
>>> From: "Patrick Kelly" <thetricksta@xxxxxxxxx>
>>> To: <ddots-l@xxxxxxxxxxxxx>
>>> Sent: Tuesday, March 30, 2010 1:22 AM
>>> Subject: [ddots-l] Re: questions on vocal and hiden track
>>>
>>>
>>>> But how can I make it so that a vocal, for example backing vocals
>>>> are panned slightly left and right? Sorry if this sounds like a dumb
>>>> question, I'm new to this.
>>>>
>>>> On 3/29/10, D!J!X! <megamansuperior@xxxxxxxxxxx> wrote:
>>>>> Switch it to mono, either select just that 1 channel instead of
>>>>> stereo when recording the track, or select the interleave stereo
>>>>> button and it will make
>>>>> the track mono; it's a toggle switch.
>>>>>
>>>>> HTH, D!J!X!
>>>>>
>>>>> -----Original Message-----
>>>>> From: ddots-l-bounce@xxxxxxxxxxxxx
>>>>> [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
>>>>> On
>>>>> Behalf Of Patrick Kelly
>>>>> Sent: Monday, March 29, 2010 3:18 PM
>>>>> To: ddots-l@xxxxxxxxxxxxx
>>>>> Subject: [ddots-l] questions on vocal and hiden track
>>>>>
>>>>> Hi all,
>>>>> I'm a new member. I'm stumped on recording a vocal track. I have a
>>>>> mic plugged int mic annolog one on my fw1884. I have a stereo
>>>>> track, however,
>>>>>
>>>>> I
>>>>> have it panned center but I'm only hearing it through the left
>>>>> side. It's
>>>>>
>>>>> a
>>>>> schure sm 58 mic. Could someone break down the steps so I'm hearing
>>>>> it through both channels? Thanks! PLEASE READ THIS FOOTER AT LEAST
>>>>> ONCE! To leave the list, click on the immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>>> If this link doesn't work then send a message to:
>>>>> ddots-l-request@xxxxxxxxxxxxx
>>>>> and in the Subject line type
>>>>> unsubscribe
>>>>> For other list commands such as vacation mode, click on the immediately
>>>>> following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
>>>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>>>>
>>>>>
>>>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>>> To leave the list, click on the immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>>> If this link doesn't work then send a message to:
>>>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
>>>>> unsubscribe
>>>>> For other list commands such as vacation mode,
>>>>> click on the immediately following link:
>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>>>> send a message, to
>>>>> ddots-l-request@xxxxxxxxxxxxx
>>>>> and in the Subject line type
>>>>> faq
>>>>>
>>>>>
>>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>>> To leave the list, click on the immediately following link:
>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>>> If this link doesn't work then send a message to:
>>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
>>>> unsubscribe
>>>> For other list commands such as vacation mode,
>>>> click on the immediately following link:
>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>>> send a message, to
>>>> ddots-l-request@xxxxxxxxxxxxx
>>>> and in the Subject line type
>>>> faq
>>>>
>>>>
>>>
>>>
>>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>>> To leave the list, click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>>> If this link doesn't work then send a message to:
>>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
>>> unsubscribe
>>> For other list commands such as vacation mode,
>>> click on the immediately following link:
>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>>> send a message, to
>>> ddots-l-request@xxxxxxxxxxxxx
>>> and in the Subject line type
>>> faq
>>>
>>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
>> PLEASE READ THIS FOOTER AT LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode,
>> click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
>> send a message, to
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> faq
>>
>>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For
> other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectunsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
