Hi guys, i run jaws from my internal card and my monitors and headphones from my external focusrite card. For jaws playback i then use one of those in ear ipod style headphones which clips to my ear. I can then comfortably ware my big monitoring headphones plus the little headphone doesn't fall out all the time. This works for me and a lot of my clients don't even relise that i'm using jaws. -original message- Subject: [ddots-l] Re: using Jaws on same sound-card as Sonar? From: "Robert Hall" <truecut@xxxxxxxxx> Date: 03/12/2010 21:03 Brian, My setup is as follows: Plugged into my output jack of my Sound Blaster, I have a stereo Y jack that is 3 or 4 inches long, one male plug and two females. I have my desktop speakers plugged into one and in the other I have another stereo Y which is a patch cord approximately six feet in length, because it needs to be able to reach my Behriger 12 channel mixer which is of course routed to my Delta 1010. This patch cord has a half-inch male plug just like the other except at the top of this Y, you have an RCA plug on each, which is plugged into the tape monitor of my mixer. Below my control room volume knob, I have a button that allows me to patch JAWS through to be heard along with Sonar when pressed and muted from being heard through the mixer when depressed, but I can still hear JAWS through my desktop speakers because they have their own separate line out from my Sound Blaster card. You can pickup these items at any Radio Shack electronics store. Hope you can make some sense or use of this bit of info. Robert. ----- Original Message ----- From: Brian Howerton To: ddots-l@xxxxxxxxxxxxx Sent: Friday, December 03, 2010 4:45 AM Subject: [ddots-l] Re: using Jaws on same sound-card as Sonar? Mike, That makes sense I think, but for my jaws soundcard, it is built in to my computer daw... ----- Original Message ----- From: Michael C To: ddots-l@xxxxxxxxxxxxx Sent: Friday, December 03, 2010 4:51 AM Subject: [ddots-l] Re: using Jaws on same sound-card as Sonar? Hello my name is Mike C from Montreal, What I do is I have my V-studio 100 for Sonar solly, and line in my sound blaster card in to one of the inputs of the V-studio. This way you could have Jaws on the same headphone. I then use my mackie 1620 onix which has the output of the V-studio, and use a pre amp headphone system in one of the monitoring busses of the mackie board. This way my clients are only hearing the music, and not Jaws, while I hear Jaws through the head phone of the V-studio, as the V-studio has a separate headphone jack. Sounds a little complicated, but this system insures the best set up for my needs. From: Brian Howerton Sent: Friday, December 03, 2010 1:54 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: using Jaws on same sound-card as Sonar? Hello Mike! I have been wondering how to best achieve having jaws and my client going through the same headphones so I don't have to wear two pairs of headphones. How do you do this? For my audio interface, I am using the mackie Onyx 1220I mixer which is a mixer and an audio interface all in one, but how would this be done or how do you achieve this? Thanks so much mike! Brian ----- Original Message ----- From: Mike Tyo To: ddots-l@xxxxxxxxxxxxx Sent: Friday, December 03, 2010 1:25 AM Subject: [ddots-l] Re: using Jaws on same sound-card as Sonar? Brandon, As you've probably have read from the replies to your inquiry, it's definitely not recommended. I use a small line mixer that I got for around 60 bucks, and everything works great. The mixer has a headphone jack on it, and I've got plenty of outputs that I can feed everything to my amp. Hope this helps. Mike ----- Original Message ----- From: Brandon Keith To: ddots-l@xxxxxxxxxxxxx Sent: Thursday, December 02, 2010 21:46 Subject: [ddots-l] using Jaws on same sound-card as Sonar? Hello, If I switched jaws' output to my external sound-card along with Sonar, would I run into any problems? Right now I'm wearing two sets of headphones and it's not very comfortable, so I'd like to just use one. Thanks, Brandon Keith Check out MySpace: http://www.myspace.com/brandonkeithcom Also add me on facebook! brandonkeith PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject�q or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq