[duxuser] Re: DBT/Braillo 400S
- From: "Jake Kyle" <jake@xxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Mon, 18 Apr 2005 13:41:13 +0100
Hi George,
Thanks for your reply. It's the latest version of the DBT demo (we're looking
into whether we can use it or not). But its connected via Serial - this is
because the embosser was built before there was a parallel connection.
Jake
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Monday, April 18, 2005 12:54 PM
Subject: [duxuser] Re: DBT/Braillo 400S
Hi Jake,
What version of Duxbury are you using? How is the Braille connected? Serial
or Parallel?
If it is Parallel, then I suspect you may need to change the BIOS Parallel
Port setting to SPP (Standard Parallel Port).
George.
----------------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Jake Kyle
Sent: 18 April 2005 12:36
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] DBT/Braillo 400S
Hello,
I am trying to get duxbury to work with the Braillo 400S embosser but am
having a few problems. It embosses the document correctly apart from there is a
short piece of unwanted braille code - 5 cells - embossed at the beginning.
Also, no matter that all the settings in duxbury and on the embosser are
initially set to single line spacing, it changes the Braillo settings to double
line spacing and so the document is produced double line spaced. Has anyone
any suggestions?
Help gratefully received
Jake Kyle
------------------------------------------------------------------------------
This Message has been scanned for viruses by McAfee Groupshield.
Other related posts:
