[duxuser] Re: DBT/Braillo 400S
- From: "Jake Kyle" <jake@xxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Tue, 19 Apr 2005 10:06:23 +0100
Great! It works!
Thanks Nigel - you've hit the nail on the head! I'm very grateful for your
help.
All the best to you.
Jake
----- Original Message -----
From: Pentronics
To: duxuser@xxxxxxxxxxxxx
Sent: Tuesday, April 19, 2005 12:09 AM
Subject: [duxuser] Re: DBT/Braillo 400S
Hi Jake,
It's possible that, if yours is an older Braillo 400, it is not compatible
with the codes that Duxbury is sending. Try selecting Generic as the embosser
model.
Nigel Herring
Pentronics
Unit3, 76 Regentville Road
Penrith, NSW 2750
Australia
Tel/Fax: +61 2 4732 6774
email: support@xxxxxxxxxxxxxxxxx
web: www.pentronics.com.au
----- Original Message -----
From: Jake Kyle
To: duxuser@xxxxxxxxxxxxx
Sent: Monday, April 18, 2005 10:41 PM
Subject: [duxuser] Re: DBT/Braillo 400S
Hi George,
Thanks for your reply. It's the latest version of the DBT demo (we're
looking into whether we can use it or not). But its connected via Serial - this
is because the embosser was built before there was a parallel connection.
Jake
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Monday, April 18, 2005 12:54 PM
Subject: [duxuser] Re: DBT/Braillo 400S
Hi Jake,
What version of Duxbury are you using? How is the Braille connected?
Serial or Parallel?
If it is Parallel, then I suspect you may need to change the BIOS
Parallel Port setting to SPP (Standard Parallel Port).
George.
------------------------------------------------------------------------
From: duxuser-bounce@xxxxxxxxxxxxx
[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Jake Kyle
Sent: 18 April 2005 12:36
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] DBT/Braillo 400S
Hello,
I am trying to get duxbury to work with the Braillo 400S embosser but
am having a few problems. It embosses the document correctly apart from there
is a short piece of unwanted braille code - 5 cells - embossed at the
beginning. Also, no matter that all the settings in duxbury and on the
embosser are initially set to single line spacing, it changes the Braillo
settings to double line spacing and so the document is produced double line
spaced. Has anyone any suggestions?
Help gratefully received
Jake Kyle
--------------------------------------------------------------------------
This Message has been scanned for viruses by McAfee Groupshield.
Other related posts:
