[duxuser] Re: Index Basic embosser query
- From: "George Bell" <info@xxxxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Thu, 7 Aug 2003 15:29:59 +0100
Hi Scott,
Sorry, I should have read to the end of the messages before I replied.
I suggest you give Sight Electronics a free phone call on 1-800 666
4883, and ask then to talk you through it. Sighted are the main USA
importer for Index. There are various ways of doing this depending on
which version of the firmware you have.
George Bell.
>
> -----Original Message-----
> From: Scott Blanks [mailto:scottsjb@xxxxxxxxx]
> Sent: 07 August 2003 15:09
> To: duxuser@xxxxxxxxxxxxx
> Cc: scott Blanks
>
> Betsy,
>
> Thanks for your ideas. However, I've tried that method on
> numerous occasions and it still advances the paper too far
> and begins embossing in the middle of the page. When I press
> the ff key twice quickly, I hear a high pitched beep followed
> by the words form feed. Then the paper adjusts. I still
> have to wonder if there is a menu setting of some sort which
> needs to be changed.
>
> Scott
>
> At 08:48 PM 8/6/03 -1000, you wrote:
> >Aloha Scott,
> >
> >When you put the paper in the embosser, just press the FF
> (form feed)
> >button on the upper left side of the panel, twice very quickly. It
> >should advance the paper a bit and line it up properly. If you don't
> >press it twice quickly enough, it will feed a whole sheet of paper
> >through and it won't be lined up correctly.
> >Betsy
> >At 05:03 PM 8/6/2003 -0700, you wrote:
> >>Hi,
> >>
> >>Does anyone know how to properly set top of form on the Index Basic
> >>Braille Embosser? I have followed the only directions I
> could locate
> >>in the braille user's guide, but the documents are still embossing
> >>from the middle of pages.
> >>
> >>Thanks,
> >>Scott
> >>
> >>
> >>* * *
> >>* This message is via list duxuser at freelists.org.
> >>* To unsubscribe, send a blank message with
> >>* unsubscribe
> >>* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> >>* subscribe, unsubscribe, and set vacation mode and other
> subscription
> >>* options by visiting //www.freelists.org. The list archive
> >>* is also located there.
> >>* Duxbury Systems' web site is http://www.duxburysystems.com
> >>* * *
> >
> >* * *
> >* This message is via list duxuser at freelists.org.
> >* To unsubscribe, send a blank message with
> >* unsubscribe
> >* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> >* subscribe, unsubscribe, and set vacation mode and other
> subscription
> >* options by visiting //www.freelists.org. The list archive
> >* is also located there.
> >* Duxbury Systems' web site is http://www.duxburysystems.com
> >* * *
>
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
>
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
