[duxuser] Re: Juliet Classic and Duxbury
- From: "Francis Daniels" <fdaniels@xxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Wed, 9 Jul 2008 15:00:36 -0700
Hi George,
The left-hand tractor is to the far left. Any more left and we would have to
call it something political. This afternoon I set the Juliet to the default
setting, went to Duxbury as set the top margin to 1 and the binding offset
margin to 3. Perfect! I am happy.
Francis
----- Original Message -----
From: George Bell
To: duxuser@xxxxxxxxxxxxx
Sent: Wednesday, July 09, 2008 8:17 AM
Subject: [duxuser] Re: Juliet Classic and Duxbury
Hi Francis,
The first question I would ask is whether or not the left hand tractor is as
far left as it should be? If it is, then setting a left margin in DBT's Global
Embosser Setup may well help here.
George.
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Francis Daniels
Sent: 09 July 2008 02:13
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Juliet Classic and Duxbury
Hello all,
I am setting up Duxbury 10.6 with a used Juliet Classic. It will do
interpoint, although the operator does not want that as the default. I know
how to set that in Duxbury.
I want to use Menu 1 for the default menu for the Juliet. As it is right
now, when I did a test run, the braille document embossed way too far to the
left, over the binding slots. It also started printing extremely close to the
top of the paper.
Do I set the embossing defaults for the binding offset and page top on the
Juliet and let Duxbury print to them, or do I set the binding offset and page
top in the Global defaults and document settings in Duxbury? I suspect I would
have to control the Juliet through Duxbury, but I'm not sure of this.
I have the Juliet manual at work, so cannot check settings here at home.
Thank you, if someone has any suggestions.
Francis Daniels
Other related posts:
