[duxuser] Re: Sleeping on the Job - was: I'm back!

  • From: jhawley@xxxxxxxxxxxxxx
  • To: duxuser@xxxxxxxxxxxxx
  • Date: Wed, 22 Jan 2003 10:43:36 -0500 (EST)

Thnkyou for your reply. I will try it. I have a new problem now. One which will 
have to go through VersaPointDuo tech support. It is skewing major time. the 
roller won't move very smoothly. It was working fine until the middle of a 
project. This is my fourth VersaPointDuo since Sept. None of them my fault for 
going or being down in the first place. I know this is not an every day 
occurance but it sure has been a trial for me. It is like a car and a female. 
Just work, I don't care how. (smile) (my dad was a mechanic)
Juanita 
Quoting George Bell <info@xxxxxxxxxxxxxxxxxxx>:

> Hi Juanita,
> 
> I can assure you that while some of Duxbury's staff might fall asleep
> on
> the job (smile!), it is not the program itself.
> 
> There are two possible problems here.  Though without knowing your
> Operating System and specific set-up, it's much of a guess.
> 
> 1)  Your system is set up to go into some kind of either screen
> saving,
> or Power Saving mode after a short period of inactivity.  I have know
> this sort of thing to cause problems in the past.
> 
> 2)  Your printer/embosser interface may not be set up correctly at the
> PC end, or you could even have the wrong cable.  Braille embossers are
> slow in relative terms, compared to printers.  So what could be
> happening is that the PC is sending a huge chunk of data to the
> embosser.  If the data is very large, a signal is sent back from the
> embosser to the PC to tell it to stop sending any more data until
> further notice.  Meanwhile, the embosser is embossing that data.
> 
> However, if the PC does not get any further communication from the
> embosser after a given period of time, it might get the idea that the
> job is no longer wanted, and decides to go to sleep on the job, so to
> speak.
> 
> My initial suggestion for now, would be to disable any power saving or
> screen saving features.  See Control Panel, Display, Screen Saver, and
> also Control Panel, Power Options.
> 
> George Bell
> Techno-Vision Systems Ltd 
> 
> > -----Original Message-----
> > From: JHawley@xxxxxxxxxxxxxx [mailto:JHawley@xxxxxxxxxxxxxx] 
> > Sent: 21 January 2003 18:40
> > To: duxuser@xxxxxxxxxxxxx
> > Subject: [duxuser] Re: I'm back!
> > 
> > 
> > I would like to know if my Duxbury goes to sleep or if it is 
> > my Versa PointDuo. 
> > When I have to leave the computer for an extended period of 
> > time, then try to 
> > emboss, I just get a screen that says it's embossing but 
> > nothing happens. I 
> > have to shut it down and reboot to get anything going again. 
> > This happened with 
> > my old VersaPoint and a different computer also. 
> > Thankgoodness I save, I have 
> > lost too many projects before. Is there anything I can do to 
> > keep it awake? I 
> > have aide work in classes periodically throughout the day. Juanita
> > 
> > Quoting duxuser-bounce@xxxxxxxxxxxxx:
> > 
> > > Hi all,
> > > 
> > > Due to a technical glitch, I got unsubscribed.
> > > 
> > > However, I'm back again, so if there's anything you've 
> > asked me, and 
> > > I've not replied to date, please resend.
> > > 
> > > All the best,
> > > 
> > > George Bell
> > > Techno-Vision Systems Ltd
> > > * * *
> > > * This message is via list duxuser at freelists.org.
> > > * To unsubscribe, send a blank message with
> > > *   unsubscribe
> > > * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> > > * subscribe, unsubscribe, and set vacation mode and other 
> > subscription
> > > * options by visiting //www.freelists.org.  The list archive
> > > * is also located there.
> > > * Duxbury Systems' web site is http://www.duxburysystems.com
> > > * * *
> > > 
> > * * *
> > * This message is via list duxuser at freelists.org.
> > * To unsubscribe, send a blank message with
> > *   unsubscribe
> > * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> > * subscribe, unsubscribe, and set vacation mode and other
> subscription
> > * options by visiting //www.freelists.org.  The list archive
> > * is also located there.
> > * Duxbury Systems' web site is http://www.duxburysystems.com
> > * * *
> > 
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> *   unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org.  The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
> 
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
*   unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org.  The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *

Other related posts: